|08-16-2013 10:42 PM|
|08-16-2013 10:28 PM|
|08-16-2013 10:21 PM|
I have one on my 2010 jku I have both soft and hard top. There is nothing that will get in the way of the hard top. it attaches to the roll bar and floor.
Love mine. I went to homedepot and got a thick out door carpet with rubber on the underside to line the top and got 3m spray glue to make it stick. Worked great and looks good.
|08-16-2013 10:56 AM|
|reissc1||Will the part of the security deck that goes on the side rail of the jeep fit sandwiched between the hard top and and jeep side? Or do you have to put it on the hard top sides?This seems like it would be a pain every time you take your hard top off.|
|03-25-2013 10:13 AM|
The older 2008 model will not allow the rest seats to be installed with the side brackets in place.
I would still like to see some pics of the old model installed if any one has any.
|03-24-2013 04:43 PM|
Hi. I have a question I haven't seen answered anywhere.
I have a 08 two door. If I remove the top and front of the enclosure leaving the sides in place, can the read seat be put in?
Most of the time, its just me, but a few times per year ( nice summer days with the top off) more than two people will ride with me.
|02-10-2013 10:53 AM|
|jdambm||Bump thanks for the pic Mark|
|01-13-2013 04:29 PM|
|01-13-2013 10:34 AM|
|01-13-2013 08:54 AM|
|burton09||Question for anybody with this in a 12 4 door. Does it sit on top of tub rails, where hard top sits? I can't tell for sure from the pictures.|
|01-12-2013 04:40 PM|
Thanks everyone on the forum. Just ordered the tuffy enclosure for my two door...... Got it for $201 shipped from Morris 4x4 using the wrangler forum 10% discount. This is just what I wanted. Now I will feel better leaving my work computer in the Jeep, making multiple stops while shopping in my Jeep with the top down, or leaving the side windows from my soft top back there.
Need to stay off the forum, it's costing me too much money. but I enjoy it too much!
|01-12-2013 11:32 AM|
First thing I noticed...it is pretty dark without some sort of light in there.
Harbor Freight....$1.00. *An LED light that I will stick in there.
You can just see the thumb tabs to remove the back panel.
Without the lid (to be plasti-dipped)
|01-12-2013 11:27 AM|
Finished installing mine yesterday.
Added a little silicone spray to are where it slides for a smoother action.
I just pulled the top part out so I can lay down a few coats of plasti-dip in it. That will help protect it from rain and scratches. Pics to come (needed to get the thread bumped so I can find it on my phone).
|12-01-2012 10:25 AM|
|gr8fulKID||cheers.. missed this thread when searching for info on this product. Christmas and my b day are right around the corner!|
|12-01-2012 06:10 AM|
|Sueby||Bump for gr8fulkid...|
|11-16-2012 11:09 PM|
|panthermark||This is still on my list of mods....but damn....why is everything so expensive?|
|11-16-2012 08:53 PM|
|GoBig19||I installed one today in my '12. Great quality product!|
|09-06-2012 05:54 PM|
Probably keep things from sliding around on the lid so much, too.
|09-06-2012 05:10 PM|
Bedlined the Tuffy deck
Finally found an opportunity over Labor day weekend to bedline the deck of my Tuffy. It had quite a few scratches that exposed the bare metal and I was worried about it chipping and getting worse and rusting. Wish I had taken some before photos but I forgot. Here are some after photos.
Really simple process. I washed it with water. Took some light sandpaper and gave it a good once over on the places I planned on lining. Then I rinsed it again and let it dry. Masked it with some painters tape and then painted it with the spray on Rustoleum bedliner. It turns out to have a very fine, sand-paper feel to it. I decided I wont use Rustoleum anywhere else on the jeep, but the texture works well on the Tuffy. I just have to remember and be careful not to scratch the back window when I'm taking it off.
|06-19-2012 09:34 PM|
|Pup||Thanks for the quick reply! It'll be close... I have no problem taking a club or three out of the bag to get them to fit. It might just work...|
|06-19-2012 09:28 PM|
|06-19-2012 08:12 PM|
|Pup||Can a set of golf clubs fit inside the security deck? I can't seem to find a definitive answer and thats the one thing holding me up from ordering one...|
|06-18-2012 10:33 PM|
|Void For Vagueness||Someone in another forum somehow carpeted one of these too, and it looked amazing. Here's a pic (with back seats folded down): Anyone know how this was done? I'm interested because I'd like to be able to remove the top deck when my dogs ride in the Jeep, but I'm worried that the stock steel looks kind of sharp- don't want dogs to get snagged/cut/be very uncomfortable...|
|06-18-2012 10:24 PM|
I may do it soon, my grandpa put a bunch of stuff on it a couple weeks ago and scratched it up... I almost cried
|06-18-2012 07:08 PM|
As I drove thru the rain today without installing my windows and got water all over the Tuffy lid, I decided I want to take some steps to prevent it from scratches and rust. I'm not willing to pay $80 for the diamond plated vinyl that Tuffy sells for it so I'm considering bedlining it.
Anyone thought of this, done it, or have a reason why it's a bad idea?
|06-15-2012 02:42 PM|
|Lighting Guy||I think 10% is the best you will find on this. That said, it is ~$45 off and a good deal. Got mine from 4 Wheel Parts a couple months ago when they had 10% off. They got it in the next day and I picked it up.|
|06-15-2012 01:23 PM|
|gkellys||Plus it is on back order for at least a week.|
|06-15-2012 12:37 PM|
|06-15-2012 10:45 AM|
|06-15-2012 09:06 AM|
|Oglethorpe||Also, if anybody is looking to get one of these, they're 20% off at Tonneau Covers, Lift Kits, Winches, Leveling Kits, Tires, Wheels & Tonneau Cover Truck Parts by 4 Wheel Parts right now. Plus free shipping.|
|This thread has more than 30 replies. Click here to review the whole thread.|