|12-01-2011 09:00 PM|
|darkproximity||Don't remember.. ill see next week|
|12-01-2011 07:56 PM|
and what RPM's are you at, at 60MPH?
right now with 31's at 60PMH i'm at about 2200 rpms.
|12-01-2011 06:05 PM|
|darkproximity||you should do fine though.. my jeep has 35's with 3.73 gears.. same motor/trans as you..|
|12-01-2011 05:59 PM|
|BeaverJeeper||good to know! if i ever go that route, i'll contact you about it! thanks!|
|12-01-2011 03:51 PM|
|darkproximity||You'll be fine beaver.. and we know a place in town that will regear for 125 an axle.. just gotta buy gears and install kits.. you'll want 4.10s or 4.56s for ratio..|
|12-01-2011 03:49 PM|
|12-01-2011 03:43 PM|
alright. i was able to scrape all the crap off enough to see the tag. i do have 3.73. 4.0 5 speed.
i hear some people say 33's are fine, and some say 5th gear is useless.
|11-30-2011 12:43 AM|
do you have the 4l?
you should also figure out your gear ratio.. should be a tag on your axle that will say..
|11-24-2011 11:13 PM|
Spokane: can i test a set of 33's?
so, i've been torn on weather or not i want 33's or stick with 31's when i get new tires. so, is there anyone willing to let me test a set of 33's? i'd hate to spend all that money and regret it.
we can either swap wheels and tires real quick, or if you have the same gears (i either have 3.07 or 3.73, i think.) and a 5 speed, let me drive your jeep a bit.
i just want to drive to the free way, hitting a few lights, or stop signs, and then drive the freeway and get off at the first exit, and come back.
i'll buy you lunch.