|Today 12:28 AM|
|Yesterday 11:21 PM|
|Yesterday 11:20 PM|
|Yesterday 11:18 PM|
|Yesterday 10:56 PM|
|tank.s||I installed today my e type hella headlights|
|Yesterday 10:48 PM|
|Yesterday 10:31 PM|
|Yesterday 09:46 PM|
|Yesterday 09:14 PM|
|Yesterday 08:38 PM|
|Yesterday 07:37 PM|
Today I put the BL on and most of the MML from my zone combo on.
|Yesterday 07:25 PM|
installed a set of Aries sidesteps ]on wife's LJ. She's a short person and needed help..
|Yesterday 07:10 PM|
|Yesterday 04:34 PM|
I replaced those damn dreaded windshield torx head bolts!! used an impact that's the secret! only had to drill out 2 of the 34, figure that's pretty good. ohh btw guys i already drilled out 4 of them for my mirrors for I believe in total their are 40 bolts. I replaced them with these from fastenal
here are the pics of what I replaced. 34 bolts in all including ones on tailgate. and I have 2 more for the flat bolts above my mirrors when I install my brackets after I paint them.
you can see which bolt in referring to in this picture, that one if a flat bottom an all the rest are bevel bottoms that fit in the groove.
|Yesterday 04:28 PM|
|Yesterday 04:05 PM|
Pink - Mine had 33x10.50 M/Ts on it when I bought it. Didn't think I'd like the width but it's kind of nice to have everything under the flare - if you run stock rims.
Drilled frame drains along with filled my battery up.
|Yesterday 03:55 PM|
|Pink_Percy||Ordered my Jeep a set of 33x10.50 bfg a/t for Christmas|
|12-23-2014 09:14 PM|
|12-23-2014 09:06 PM|
|12-23-2014 07:25 PM|
|raif281||can anyone tell me the size and all I need to know for the size of the front bumper bolts!!|
|12-23-2014 06:59 PM|
Dropped the money on Bixenon Projector retrofit. 35w potted ballasts. 4300k bulbs.
The decision did not come easy, as I was liking at HID floods (Hella, KC, Pro Comp, etc). I decided that I needed on road and off road functional lighting. I have done a projector retrofit on my zx6r and it was revolutionary. I decided retrofit is the best option to add to 2 led cube spots and I'll be adding 2 led cube floods soon. Forward lighting will be done.
|12-23-2014 03:49 PM|
|12-23-2014 03:24 PM|
|12-23-2014 03:20 PM|
|fltopp1||Help!!!!! I replaced my clutch kit, pilot bearing, throw out bearing, and flywheel. I put the tranny back on and installed the shifter but it still feels a little loose, even when engaged. My problem is it doesnt go into gear. The pedal (clutch) feels like its engaging and there is a slight sound difference you would expect when the clutch pedal is engaged. However there is no contact somehow of it going into gear. Any thoughts???|
|12-23-2014 03:10 PM|
Put my DECEPTICON decals on. Got silver on reflective white outline. Thanks to pixeldecals.com.
|12-23-2014 11:41 AM|
|ben_||Washed it... I almost forgot what it actually looked like under all of that salt and other crap|
|12-23-2014 12:33 AM|
Today I found out something special about the "3 inch lift" that was on my current Tj when I purchased it. Knew it was a bds, was told its 3". Finally measured and the fronts came out to 16.5 total. 4.5" lift. I knew something was fishy with that.
Nice to know. I now feel dumb and lucky at the same time.
|12-22-2014 08:57 PM|
|anavrinIV||Today I buttoned up my clutch swap and oil pan gasket replacement and changed the trans and transfer case fluids. I had a horrible rattle on clutch engagement that turned out to be loose springs in the disc, and the pilot bearing was completely shot. Last bit of maintenance should be the valve cover gasket but I'm not sure I have the energy at this point, the rest of the job wore me out.|
|12-22-2014 08:42 PM|
|jjat||I just put on my Trail force HD Front bumper and the barricade rear bumper with the tire swing out and the barricade side rock sliders with steps and a super winch Tigershark 9500 with synthetic rope and poison spider hood louver Will post pictures when I get back to my jeep at work|
|12-22-2014 11:46 AM|
|raif281||howlie I'll take some pics when I get off work|
|This thread has more than 30 replies. Click here to review the whole thread.|