|02-12-2013 11:23 AM|
I believe the back spacing is 6" on a stock wheel. to handle 12.50 wid most recommend a 4.5" back space. I been looking in to this my self. I like to go 35x12.50 on a 17" rubicon wheel. will not work unless you use spacers which are illegal in my state of new jersey. good luck
|12-13-2011 11:12 PM|
|sunnykk||Anyone know exactly what the backspacing is for the stock SportS 17" Rims.|
|12-13-2011 10:27 PM|
|Ballandchain||I would just buy a set of wheels and stick them aside until you can afford to buy tires. When you have them both, put them on. Plus, having a set of brand new wheels sitting around is great incentive to save for the tires......|
|12-13-2011 10:17 PM|
|mbodella||Does anyone know of rubbing with the Black Rock D Window Alloy 15's|
|12-13-2011 10:00 PM|
It's getting very confusing. I read somewhere that if you change the tires and the center line of the new combo is not close to where the center line of the OEM wheel/tire combo, there could be stress on the bearings.
My limitations are, I don't want to do a lift and I don't want the tires to stick outside of my fenders. I am leaning towards the 16" rim size and the two tire options I have is:
265 x 75 x 16 which equates to 31.7 x 10.5 x 16
Rim width range: 7-8
285 x 75 x 16 which equates to 33.1 x 11.3 x 16
Rim width range: 7.5-9
How do I calculate the backspacing required on the wheels to match the position of the new combo to the stock combo.
Stock is 255 x 75 x 17 --32 x 10 x 17. I read somewhere that it is 6.25" but I cannot confirm. For calculation purposes, let's assume that the backspacing is 6.25".
|12-13-2011 09:44 PM|
|12-13-2011 09:21 PM|
Thanks for the link #ESP.
Probably go for the 16" wheels. I read somewhere that some folks have had issues with 15" wheels with rubbing etc.
I never got any feedback regarding lift. Everyone that does tires also do lift. At this point, without doing any lift, can I still go wider and a bit taller?
The 305 x 70 x 16 looks amazing. It sticks outside of the fenders which could be an issue with clearing safety. I guess, that's the nature of the beast huh!
Question on backspacing and spacers.
Is backspacing dimension specified as part of the wheel specs and is spacers something you add later?
|12-13-2011 09:04 PM|
|12-13-2011 08:59 PM|
If I decide to sell the whole stock tire/wheel package and go with a smaller wheel - let's say 16" or 15", do I have to do a lift or can I make the change with only changing the back spacers etc. I do not want to do a lift at this point.
The options I saw on tire rack were
285 x 70 x 16 which equates to 33.1 x 11.3 x 16
Rim width range: 7.5-9
or Option 2
33 x 12.5 x 15 (Overall diameter is actually 32.5)
Rim width range: 8.5 - 11
With either of the two options, I will probably need to do change Back spacers. Is that all or would I need to do a lift.
Also - How can I calculate if my tire will stick outside of the fender. I do not want it to stick outside the fender.
|12-13-2011 08:45 PM|
|jkjeeper06||Option 1 will fit perfectly, option 2 will require 1 of 2 mods. The first is wheel spacers which would run you $100-$200. The second tho which my friend uses on his jk is to put a washer or 2 on the steering stops. The tires will only rub at full lock if you dont do anything so if you adjust where full lock is, it won't rub anymore. It's about $.50 too so that would be the best option if you do #2|
|12-13-2011 08:44 PM|
|ESP||Don't change anything yet. Pick up your jeep and then sell your stock wheels AND tires as soon as you drive them home. Mine went for $500 and I didn't even sell the wheels with them. You will probably be able to get another $100-150 for the wheels with them. Then you can buy a set of smaller wheels and bigger tires. This is how most people do it.|
|12-13-2011 08:40 PM|
Question on Max tire width that can go on stock 17" rims
This is crazy. I just ordered my JKU SportS, due some time in January and I am already thinking about changing my tires.
I am not very fond of the stock tires that's on the SportS. Due to budget constraints, I am thinking of only changing the tires to the Duratec but herein lies a slight problem.
The stock tires are 255 x 75 x 17 Which equates to 32.3" x 10" x 17"
Stock rims are 17 x 7.5
Unfortunately Duratecs do not make this size. the closest size I could find to match my wheels are:
265 x 70 x17 which equates to 31.7" x 10.5" x 17 (Rim size range 7 - 8.5)
or if I go up one more size
285 x 70 x 17 which equates to 32.8 x 11.5 x 17 (Rim size range 7.5 - 9)
The stock rim being 7.5 should be able to take both the tires.
Couple of questions
1. Change in height of the stock tire from 32.3 to either (31.7 or 32.8)
2. Change in width of the stock tire from 10" to either 10.5 or 11.5)
Is it going to work without any issues or would I need to change the BS or offsets for any of the two options.
Thanks in advance for all the replies. This place is awesome.