|01-30-2008 03:30 PM|
I first got into both military, commercial, and civilian (ham) radio communications in the late sixties and trust me when I say that most HF installations, whether it be commerical or military, usually have excess antenna cable coiled up without problem.
Yep there are all kinds of coils like RF chokes that can cause problems but simply coiling up exessive RG-58 etc. cable in a common arm-size diameter isn't going to cause a problem for a CB.
|01-19-2008 10:18 PM|
|Darton||ok good. That is how I planned to wrap it.|
|01-19-2008 10:12 PM|
|nicolas-eric||if you wrap it around once or twice and the cable is wrapped unsteady and not like a spool it will be ok.|
|01-19-2008 10:09 PM|
|Darton||I planned on using the zip ties but I may need to wrap it around the bar in a coulpe places just to use up some extra slack in the wire. Yean my jeep has bedliner sprayed in the tub instead of carpet. It was done by the previous owner.|
|01-19-2008 10:06 PM|
remove the padding and run the cablke along the rollbar with some zip ties. donīt run the cable around the rollbar. i wouldnīt do that.
you have a 05 TJ without carpet...?
|01-19-2008 10:02 PM|
|Darton||I'll probably put it on a tail light antenna mount. I want to run it through the inside of the jeep but I don't have any carpet to hide it under so the roll bar padding is another place to run the wire and keep it hidden|
|01-19-2008 09:26 PM|
|nicolas-eric||where do you want to install the antenna? why will you run the wire along the roll bar?|
|01-19-2008 09:20 PM|
|Darton||will it be ok if I spiral it around the bars not in one spot but along the length of them to take up extra slack?|
|01-19-2008 05:43 PM|
|skeeter||That should be fine as long as you don't coil it up.|
|01-19-2008 05:17 PM|
antenna wire routing
Will it be ok to run my antenna wire along the roll bars under the padding? The metal bars won't cause interferance??