|12-23-2011 01:20 AM|
|Sbrooks72||Sorry, here it is. kidrock posted this. All the way down the page. http://www.wranglerforum.com/f5/chea...ds-102868.html|
|12-22-2011 11:03 PM|
|12-22-2011 10:34 PM|
I think you can use this thread posted by another forum member. Hope this helps.
|12-22-2011 10:14 PM|
|12-22-2011 10:07 PM|
That was from Reno 911 a loong time ago. Good stuff!! I wouldn't worry about it. There is a thread or quite a few on here where people have changed out their gauge cluster or modded them with aftermarket gauge clusters.
|12-22-2011 10:05 PM|
|darkproximity||its 5200rpms.. you should never need it that high though.. the engineers specifically designed the motor to make its power in the low to mid range..|
|12-22-2011 10:04 PM|
|Irongrave||on my 2.5 I bounce off the limiter at like 5.5-6k or so|
|12-22-2011 09:59 PM|
|ClayL||There should be a red line, i think its like 5K, but i could be wrong, havent driving mine in awhile|
|12-22-2011 09:57 PM|
|12-22-2011 09:36 PM|
|Sbrooks72||Just gun it n run it!!!|
|12-22-2011 07:59 PM|
|12-22-2011 07:56 PM|
No red line on YJ ?
Anybody know why?