|08-10-2006 11:01 AM|
|bluvikng||You can remove the two bolts that hold the tag on, and remove the tag, without affecting the seal on your diff. It would be easier to read, once removed.|
|08-10-2006 08:50 AM|
easiest way is to call dealer and read off the last 8 of your vin. they'll be able to tell you ratio and if locking or non.
or like bluvking mentioned check tag on inspection cover.
|08-10-2006 12:38 AM|
|bluvikng||You can check with the dealer, with your VIN number, or, try to read the tag on your diff. cover. It is located between two of the bolts, on the cover. Usually vertical, in the same line as the axle tubes. Or the 9 and 3 o'clock position.|
|08-10-2006 12:04 AM|
I just want to double check what gears I have. Where can I find the label or where does it say the ratio?