|01-09-2012 08:21 PM|
|12-23-2011 10:12 PM|
|zcspindoctor||I will tomorrow ... It also seams strange I thing my transfer shift pattern goes all the way foward 4L-N-4H-2H back ??? Idk could be a custom linkage I'll get back to you tomorrow with some answers thanks !|
|12-23-2011 08:59 PM|
|AKYJ||I have the exact same set up as you except. The rubicon drive shaft. I did have that problem except in first and reverse it ended up being the transfer case was messed up. Try putting it in 4 hi and 4 low and see if it still does it?|
|12-23-2011 06:29 PM|
|zcspindoctor||oh i forgot to say it does have a rubicon SYE and custom driveshaft the tranny is a nv3550 with a np231 transfer its fine in 1st|
|12-23-2011 06:11 PM|
bad vibrations in reverse???
I just bought a 95 YJ 4.2 with 5.5 spring over lift 5 speed that shutters badly in reverse stalls 50% of the time it has a 8.8 rear end and the pinion angle is not bad what could be causing this and any suggestions for a fix?