|01-12-2012 09:51 AM|
|Ibuildembig||Sounds like you need some good spacers that are thicker|
|01-12-2012 09:48 AM|
So after buying 5/16 spacers that don't allow enough thread for the stud to grip I looked into spacing the steering stops but a prev owner has tach welded one side....
Any words of wisdom? Driving on the road, I am getting used to when it will rub & can avoid...my concern is offroad, if I'm in a tight spot I will have trouble getting out...
|01-09-2012 04:06 PM|
|aJeep4Jaime||Thanks, I didn't think of that!|
|01-06-2012 10:34 PM|
|Big Cole||Your rig will look odd with only spacers on the front. I'd suggest adjusting your steer stops using some washers, which will keep the tires out of your leaf springs.|
|01-06-2012 07:17 PM|
95 YJ with 3 inch lift..31's rubbing
I had 31x10.5r15 installed and they are rubbing on the leaf springs & sway bar when I turn.
I want to get spacers to fix this issue, but I see they are only sold in pairs.
My question, is it safe to only put them on the front? Would it be obvious by looking at it? I'm thinking I should get 4 but they aren't as cheap as I thought they would be, so I might stagger the purchase but just wanted any opinions/advice.