|03-03-2013 01:36 PM|
|01-20-2012 07:28 PM|
This happened 13-14 years ago after I foolishly installed a locker into my original D35 with 33" tires. It made it through one mild wheeling trip and then two months later, the differential and shaft pretty much exploded while making a slow-speed u-turn at a light-controlled intersection. Literally, no exaggeration.
About a month later I installed my Dana 44 replacement with a Detroit Locker.
|01-20-2012 06:28 PM|
Wow this thread is certainly an eye-opener... think there's no question about the axle upgrade. Will probably go with an 8.8 from East Coast Gear when I'm ready.
Welcome to the forum Blackbelt and thank you for your service. Use the forum search to find most answers and hope you like working on things!
Keep the stories coming!
|01-20-2012 03:57 PM|
ok here is the story, i bought my jeep (1st Car) before i deployed to Iraq. i was gone 16 months and when i came home i was ready as ever to drive my jeep! i will admit i drove it hard. shifting from 1st to 2nd my rear end got jacked up. my father came out to look at it and told me to put it in 4 wheel drive and try to get it home. so i did and very slowly. however after about 1/4 of a mile i heard a god aweful noise.... well turns out driving it in 4 wheel drive without removing the rear drivetrain was not the best idea (gotta love Pops)... after breaking down rearend and front i realized on the front id need to replace just the ring and pinion, but the entire rearend... my question is, who to talk to, what questions to ask, and what parts are the best. keep in mind this is my first car and i dont know very much when it comes to going about this. any information would be most appreciated.
|01-20-2012 03:24 PM|
|01-20-2012 03:00 PM|
|01-20-2012 02:49 PM|
|jeepjones||It tends to be the bounce & spin that makes them snap. This happens a lot when climbing rocks/obstacles. It also helps to run nothing larger than a 33" tire, any larger and it's just a matter of time.|
|01-20-2012 02:40 PM|
|doclouie||Have not broken mine yet, but I do have a locked rear axle on 31s right now with chromolly shafts. I always carry my spare shafts just in case.|
|01-20-2012 02:32 PM|
|SpoiledRotten||I haven't broken one yet (knock on wood) but I've bent one.|
|01-20-2012 08:53 AM|
I destroyed the spider gears once and snapped a shaft another time before I upgraded to a d44. Had 33" tires w/ stock gears and was driving a straight line down the road at about 40mph when I hear a loud bang. That was the spiders going. Then a few months later was turning around in a field after running some trails and felt the back end slide a little weird and it was the shaft coming out.
d44 w/ 4.88's OX locker 35x13.5 mud terrains now and it is great!
|01-20-2012 08:32 AM|
|01-20-2012 01:47 AM|
|01-20-2012 01:46 AM|
Check this out:
|01-20-2012 01:35 AM|
|01-20-2012 01:33 AM|
|Image Group||2001 TJ lifted with 35's just arriving to Tierra Del Sol and I made a U-Turn on asphalt. Snapped the stock axle. Dealer was very apologetic over the phone. I only had the JEEP for 3 weeks. When I pulled into the dealership (I did a roadside repair after having an axle delivered) they seen the after market lift and immediately started to refuse any liability. The JEEP didn't even have 500 miles on it yet.|
|01-20-2012 01:30 AM|
|01-20-2012 01:02 AM|
hey man i have a question where did your friend get the jerry can mount for the xrc rear bumper i have been looking but cant find one
His Jeep left the park on a flatbed truck and was hauled directly to his preferred 4x4 shop, where they installed a new G2 Dana44 axle. While he was at it, he also regeared and installed at least one locker. [/QUOTE]
|01-20-2012 12:55 AM|
I introduced my friend Marc to Jeeping and helped him buy his '98 TJ Sport. It was the perfect "starter" Jeep for him... other than the Dana35 rear axle. Later, he spontaneously installed a cheap lift and 33" tires (without consulting me), but still has the stock 3.73 gears, open diffs and automatic transmission.
The second time we went wheeling with his lifted Jeep, this happened:
He was simply climbing the hill seen in on the right in the background of the first photo. Nothing really extreme, actually. Everybody in a 50-yard radius heard the axle snap, though.
His Jeep left the park on a flatbed truck and was hauled directly to his preferred 4x4 shop, where they installed a new G2 Dana44 axle. While he was at it, he also regeared and installed at least one locker.
|01-19-2012 08:36 PM|
|Mrmikeypoo||Slipped off a short waterfall and snapped the short side. 31-12.5 bfg and Detroit. 8.8 and 33's now with no worries.|
|01-19-2012 08:28 PM|
I got a D44 now
|01-19-2012 08:23 PM|
A good friend of mine did tho, he had done some rock climbing for the time ever(usually just muds). On the way out of the trails he was on a section of bad whoops and that when it finally snapped.
|01-19-2012 08:09 PM|
Have you Snapped a Stock Dana 35 Axle ?
Contemplating a Ford 8.8 swap in the future but am curious how many folks have actually snapped an axle on a stock Dana 35 rear and under what conditions did it break?
Post up your experiences please and thanks