|02-15-2008 12:47 PM|
|02-15-2008 12:17 PM|
|porterdriver||On my TJ tranny there are a number of already drilled and tapped ports in and around the transmission case. I just selected the one that was the matching size for sending unit and threaded it in. Took five minutes (well, at least that part did) and works great.|
|02-10-2008 07:45 PM|
i have the 4spd OD tranny.
a pan with a drain plug would be perfect.
|02-10-2008 07:19 PM|
Just as long as he has the 3spd. trans and not the O.D. trans. I don't think they make a deep trans pan for the O.D. trans, at least this is what I found out looking for one for my 3spd trans.
|02-10-2008 07:13 PM|
|Rawkon||Nicholas theres a couple companies that make deep trans pans for our tjs. im running the Rubicon Express deep pan. It came with a drain plug all i need to do is fine and adapter for the threading or have it re threaded for my sending unit. you can order a pan get it welded up then on a saturday install it. it took me a couple hours to do mine. because i had to drop the tcase crossmember|
|02-10-2008 06:39 PM|
|4.0l sahara||I would just do it in the pan as it is the best way to do it.|
|02-10-2008 06:29 PM|
|02-10-2008 06:27 PM|
|Triple88a||cant take off the pan and use another car or ur friends to drive u there?|
|02-10-2008 06:24 PM|
the problem is that i only have this TJ.
when the tranny pan is off i canīt drive to a shop that can weld that for me.
|02-10-2008 06:18 PM|
|Rawkon||the only problem with putting it inline with hose is you need to have the sender grounded (im pretty sure) the best way is what was said earlier by putting it in the pan.|
|02-10-2008 06:12 PM|
|4.0l sahara||It's pretty accurate if you put it in the line carrying the hot atf to the cooler. But a shop could weld the bung on in a min or two if you drill the hole.|
|02-10-2008 06:03 PM|
i also want to install anadditional tranny fluid cooler. is it still accurate enough if i install the temp sender in the line to that cooler?
|02-10-2008 05:55 PM|
|02-10-2008 05:53 PM|
|Triple88a||Auto tranny is made of sheet metal?|
|02-10-2008 05:53 PM|
This is the right way.
|02-10-2008 05:50 PM|
|02-10-2008 05:41 PM|
|Triple88a||Instead of welding it cant you use a tap to tap the pan it self?|
|02-10-2008 05:40 PM|
|4.0l sahara||To get the most accurate reading drop the pan and cut a hole. Then weld in a bung with 1/4 npt threads. Then put pan back on and thats where the sendor goes. There are other ways to do it but that is the most accurate.|
|02-10-2008 04:39 PM|
C or C and F...
all my stock gauges have C and F or mph and kph or liters and gallons.
|02-10-2008 04:30 PM|
|Triple88a||Are you looking for just C or both C and F?|
|02-10-2008 04:28 PM|
Auto Tranny Oil Temp Gauge ???s
i want to install an auto tranny oil temp gauge in my TJ like this:
and i want to install it like this (together with an air pressure gauge):
could you please tell me how i have to install the sender for the auto tranny temp gauge?
do you know such a gauge that also has a scale with degrees celsius?
thanks in advance.