|02-07-2012 07:56 AM|
|blinddub||haha looks awesome, love the green as well|
|01-25-2012 02:41 PM|
My brother and I welded this one up for mine
|01-25-2012 02:00 PM|
|dama417||Good idea, just won't be able to open the rear unless you take the whole thing off.|
|01-25-2012 01:57 PM|
|Owen_TJ||you should attach the pic for us work blocked folks|
|01-25-2012 01:47 PM|
Got Some Curious Looks Yesterday....
Driving home from the feed store:
I had a couple 80# bags of pellets in the back too, LOL.
Baby Jeep did good. I bought the rack to haul snowboards, and figured a bale of hay would be a good proof test. It's a $69 Harbor Freight "Haul Master" brand carrier. It's to low to be useful for offroading.
My future plan is to buy a receiver draw bar with a 6"-8" drop, like this:
Invert it, and weld it to the carrier rack. That'll raise it off the ground enough for 4x4 expeditions.
It shouldn't take more than a few minutes at home with a grinder, a trip to the fab shop with $20 for a good ol' boy with a welder, and some black Krylon to finish it off.