|02-03-2014 01:29 PM|
do any of you have photos of the rear tire and rear bumpers installed?
im looking for a tire carrier that will hold up and would like to get the weight off the tail gate
|05-12-2012 10:22 PM|
|07XMan2Door||Thanks Tumbleweed. I like it a lot!! Looks like you have a 4 inch lift!|
|05-12-2012 07:59 PM|
Bushwacker flatties. $459 on their site. $50 rebate.
I don't have a true side view.
I gained about 3 1/2" of tire clearance.
Very nice product. Nice touches with molding around gas door and hood latches.
Now back to your regularly scheduled thread!!!
|05-12-2012 10:03 AM|
Silver & black is such a winning combo!
|05-12-2012 09:35 AM|
No suspension mods yet. Lift kit soon.
Use: DD, light trail, mild rock crawling.
ACE stubby, 1/4" steel, 85 lbs., slight trimming of OEM cross piece.
Picked it up at ACE. $435 + tax.
EXTREMELY satisified. I will get the rear one from them ASAP
I prefer the look of a stubby bumper with flat fenders.
The front end sagged about 1" from the weight of the bumper and winch.
AEV pricing??? I think Apple makes the bumpers for them!
|05-12-2012 08:03 AM|
|05-12-2012 02:02 AM|
ARB bar with 10,000lb winch. Running Rubicon Express 3in lift.
|05-11-2012 11:21 PM|
Designed & built this bumper myself.
Cost me $40 in steel for the front & rear.
Winch plate, push bar & all weighs 70 lbs (excluding winch). Everything is 1/4".
I have the 2.5" TeraFlex lift, 35" tires.
It's kinda plain but so am I.
The link to my bumper build is in my signature.
|04-13-2012 01:57 PM|
Last month I installed a Smittybilt SRC on my 2010 JK.
The install was not difficult. I had to drill the front mounting plates to get it on there, but I knew going in that I would have to do that. The winch installation was a bit difficult due to the presence of a flange that makes the back mounting bolts hard to access, but I was able to get it done with a low-profile swiveling socket. That is my only gripe about it. The bumper comes with holes pre-drilled for aftermarket fog lights and I added a pair of KC Apollo Pro lights to it.
The install probably added 140-150 pounds to the front of my Jeep and it seems to have caused a small amount of sag. I will be putting spacers on the front to level it out.
The first time I took it out on the trail, I hit the front skid plate pretty hard on a bank. The bumper did not sustain any damage that I can see--the powdercoat is still unmarred and it did not bend/break. It seems like a very, very solid piece of equipment. I had to get unstuck twice - once with a snatch strap and once with my winch and it held up very well.
My Jeep runs on stock suspension and it is my DD but I also take it out wheeling/mudding--nothing too extreme.
400 bucks from Quadratec. I love it and would not choose a different bumper. One of my wheeling buddies told me "I wasn't sure about it, but now that I see it on your Jeep, I really like it."
Picture of the finished product here:
|04-13-2012 01:36 PM|
Everything was easy, with the exception of the stubby ends. 3.5-4 for the entire process, a large portion of that was the 2 stubby ends. I first connected them, then tried to mount the bumper. Well the upper most forward bolt got in the way of the frame rail, so I just took them off all together thinking it was the easiest way. Got everything in with relative ease, then spent a long time trying to get the ends back on. The mid section is so close to the frame rails that it is tight to get the nuts on, the ends are so tight that the bottom bolt can only be held on with a open end. The ends may have been easier if I had one of those combination wrenches that had the ratcheting box end. Or, better yet Craftsman has a new combo with both ends ratcheting. But, my ratcheting combos only go up to 18, and those are 19. (If you can find one in 19 it maybe worth it, just for this) or figure out how to get the bumper on with the stubbys already in place, minus the one bolt. Might not be that hard, I just went from one extreme to the other. Almost everything was metric.
I weighed my self 2 getting the same number holding the empty box, then again with everything that was going to be installed. everything as seen, 58 lbs. I again did the same this time weighing everything I removed from the jeep, minus all the dirt I was able to get to in the frame behind the bumper, 46 lbs.
Rugged Ridge Aluminum XHD, it is a DD with occasional mudding (Charleston, SC) is pretty flat. Currently have 3" Mopar lift.
|04-12-2012 09:03 PM|
|04-12-2012 08:18 PM|
|backwards||What! No pictures of YJs?|
|04-12-2012 03:24 PM|
|04-12-2012 03:22 PM|
From the title of the thread I thought this was going to be a review of "Huge Front Bumpers" but all the ones posted so far don't look fairly normal...
I guess it's all in your perspective.
|04-12-2012 02:27 PM|
Like I said I went all out. Plan to keep this Jeep for a long time. I have an 8 Year old son. This would be a great first vehicle when he gets 16.
|04-12-2012 01:41 PM|
1. post a picture of YOUR after market bumper after install (if possible, a before install picture of your Jeep as well)
Bumper... and other stuff...
2. list suspension mods already existing on your rig
Terraflex leveling kit
3. intended use (rock crawling, DD, Mudding, light trail, etc)
Lookin' hot for the gurlz at the mall.
What is it?:
Metalcloak Frame built bumper w/60"light caps
All steel +/-70lbs.
Fairly difficult as far as bumpers go. Multiple pieces, 24 bolts, and 8 screws.
Had to remove the lower bar and vacuum pump bracket completely, and relocate the vacuum pump. Extended fog light harnesses. Also flipped the sway bar motor over for ground clearance.
LOVE IT! Looks tough, gained a lot of clearance up front, and increased my approach angle.
|04-12-2012 12:20 PM|
|04-12-2012 11:05 AM|
|bwbrown1||It was a small fortune but I figured that I should go ahead and do it now and enjoy my Jeep. The Winch was a Warn VR8000. Very reasonably priced. The bull bar came with the bumper.|
|04-12-2012 08:25 AM|
|04-12-2012 02:50 AM|
|04-12-2012 12:11 AM|
|04-11-2012 11:38 PM|
|04-11-2012 10:48 PM|
|bwbrown1||AEV Front Bumper - Put AEV on back as well|
|04-11-2012 10:45 PM|
Rampage does make a bumper for your Jeep, but it's different from the JK version:
76510 - Rampage Products Front Recovery Bumper with Stinger for 87-06 Jeep® Wrangler YJ, TJ & Unlimited - Quadratec
|04-11-2012 09:25 PM|
|02-28-2012 09:14 PM|
|02-28-2012 09:03 PM|
Yours looks pretty cool as well!
|02-28-2012 09:02 PM|
Like KBWWOLF, I like the Rampage bumper.
I particularly like how it fits with the stock fenders and will help protest them. I plan on upgrading to bushwackers and think they will go well together.
|02-28-2012 08:47 PM|
LoD Offroad Mid-width bumper
2. Rock Krawler 2.5" springs, Bilstein 5100 shocks, JKS front lower control arms, JKS rear lower and upper control arms, JKS front and rear track bars, Teraflex front and rear bump stop extensions, Procomp steering stabilizer.
3. Built for trail riding and daily driving.
manufacturer: LoDoffroad.com [Made in USA]
construction material: 3/16" steel
weight of bumper: 75-ish pounds
ease of installation: very easy
modifications needed: none
where purchased: Northridge4x4.com
cost: $728 shipped
satisfaction: 5 out of 5 stars
|02-28-2012 08:45 PM|
|kbwwolf||Very unique. And I love the Spidertrax lights...|
|This thread has more than 30 replies. Click here to review the whole thread.|