|02-18-2012 04:12 AM|
Hay JeepCreeper, what did the shop charge you to install your lift and SYE? I might have to do the same.
|02-17-2012 09:19 PM|
Oh, had my jeep doing 80 on the interstate ... Handles great!
|02-17-2012 09:17 PM|
|02-17-2012 05:51 PM|
|AzTJ||Some one mentioned shock extenders for the rear shocks... If they are a mono-tube style shock, you can run them inverted... or just trim the coil perch. Don't use extenders as they will probably rip the shock mount off.|
|02-17-2012 05:11 PM|
|TnDz TJ||Came out awesome! Congrats! I can't wait to get mine on. Just a few more parts and I will get busy on installing my 4" lift and 33's and 4.56's|
|02-17-2012 04:05 PM|
|MikeMTJ||I am jealous.|
|02-17-2012 04:00 PM|
|Rusty762||rubiblue thanks for the write up, you helped me make up my mind on the Currie/Savvy lift. I just called Gerald to place my order and he is out of town till the 24th, damn it! Going to try to be patient...|
|02-16-2012 11:57 AM|
Currie Anti-rock takes a little time to get use to... Not bad, just differnt.
|02-16-2012 11:54 AM|
|02-16-2012 10:49 AM|
|Imped||JJ's promote a better ride than rod ends and poly bushings. I've used RK arms and Currie arms (and built my own using Currie JJ's) and I'll take Currie all day long. The nicest riding rigs out there use Currie JJ's at all ends.|
|02-16-2012 10:39 AM|
|Waterlogged11||Looks real nice. How does it ride? I'm torn between the currie/savvy 4" short arm lift and the rock krawler 3.5 x factor plus short arm kit.|
|02-16-2012 07:00 AM|
|06rubiconblue||Sure did! its Awesome!|
|02-15-2012 11:40 PM|
|Waterlogged11||Get the lift in? Any pics??|
|02-02-2012 02:38 PM|
Don't bother with the relocation brackets; if you're shocks hit, I'd just trim the spring perch a bit (or outboard, but I'm guessing that's more than you want to do right now).
Also, the rear trac bar relocation bracket from Currie is made for their trac bar with a Johnny Joint on one end, thus the bracket will be a bit too wide for the bushing in the stock trac bar. You could probably get away with using washers to take up the space, but I just wanted to give you a heads up for when you go to install it.
And x2 on getting the 5th tire.
|02-02-2012 12:44 PM|
|02-02-2012 12:40 PM|
|02-02-2012 12:37 PM|
|morton615085||How bout sye with d.s?|
|01-29-2012 08:44 PM|
|blue6tj||You need the 5th tire just incase you blow one... have fun...|
|01-29-2012 12:02 PM|
|01-29-2012 09:25 AM|
No sweat..... I have found them for around $15 online.... Gonna be a sweet setup for ya!!! Nice !
|01-29-2012 01:36 AM|
Nice!! Its always somethin haha...
I'm only going to run 33's (currently on 32's) which is why i'm gonna do the 4.88's...should be a nice daily driver/weekend offroader
I was planning on ordering my fan, front bumper, and winch at the beginning of last week but the guy doing my tattoo decided to flake out on me (after our trade work was done on my side) so i had to go to a shop and was quoted 1,000 to finish...so that ate up the jeep budget for a little bit
Definitely post pics when you've got the parts on...
|01-29-2012 01:25 AM|
|01-29-2012 01:22 AM|
wish i had your wallet lol...
i want a new front bumper, winch plate, winch, rear bumper with tire carrier, sliders, ford 8.8, 4.88's, electric fan, tummy tuck (with all parts), and i'm sure theres a few things i'm forgetting lol.
Should look good when you get the parts on there!
|01-29-2012 01:21 AM|
|01-29-2012 01:15 AM|
|01-28-2012 11:40 PM|
|Owen_TJ||you could throw a new front and rear bumper with winch and winch plate on that list...then ship them to me, please|
|01-28-2012 10:57 PM|
|TnDz TJ||You may need rear shock relocation brackets after you rotate your pinion up. The shock may contact the coil pad on the axle.|
|01-28-2012 08:06 PM|
|01-28-2012 08:03 PM|
What am i missing? 4" lift...
First off, Thank you Gerald from Savvy Off-road!
Ok! I got this... Anything Missing? For 2006 Rubicon with a 6 speed...
4" Currie Springs front and back
Currie Bump stops
Currie Rear Track bar relocation Bracket (passed on rear Track bar at this time)
All 8 Savvy aluminum control arms
Currie Adjustable Front track Bar
Currie Rear Sway bar extenders
4" stainless steel brake cable extensions
4 Rancho 9000XL adjustable Shocks (for 4' of lift)
1 Rancho Steering Stablizer
1 Tom Woods Double CV drive shaft
4 Mickey Thomson Baja Claw TTC 33x12.50x15
4 Crager 5x4.5 4" backspacing soft 8's
Should i be OK for a while?