|09-17-2006 03:24 AM|
Glad to help
|09-16-2006 09:58 PM|
Wow, thanks for the help.
Looks like with the proper cutting tool I can make the final outcome very "factory".
|09-16-2006 04:03 PM|
The kit is "Blazer Desert fox" Part number on the box is c55c.
I apoligize for the editing on the pic, I will get the program figured out sooner or later.
|09-16-2006 12:50 PM|
|09-16-2006 12:36 PM|
|mrbigjeep||yeah i've seen some of those switches turned into switches for arb air lockers or somthing like that so im sure you could do it for lights|
|09-16-2006 11:49 AM|
I just got a 99 TJ Sport and I'd like to put fog lights on and use one of the three empty spots on my lower center dash for the switch.
I'm curious if anyone has had success putting an after-market switch in this location (KC or otherwise)? If not what suggestions would you suggest?
|09-11-2006 01:37 AM|
Thanks everyone. I actually took it to a local mechanic and he replaced the master switch which fixed the problem.
|09-08-2006 01:24 AM|
|upinar||The same thing happened to my 2002 wrangler, that fog lights would not turn on or the fog indicator. It was my switch on the turning signal stick. I just pulled the switch on and off a lot of times and eventully it just turned on. I guess it was just build up in the switch that was restricting connection. TRY IT!|
|08-23-2006 01:29 AM|
Making It Easier
Khenderson is absolutely right about rewiring. To ame a rewire simple, you can purchase a two light KC Hilites heavy duty wiring kit from Quadratec for about $20 which is easier than buying the individual compnents. The kit includes switch, fuse, connectors, cable ties, and heavy duty wiring. Hope this helps.
|08-20-2006 10:47 PM|
|03Leo||Thank you all!|
|08-20-2006 10:00 PM|
|khenderson||can always just cut the lines at some point shortly after the lights and wire them up yourself with your own switch.|
|08-20-2006 05:20 PM|
|jeeperman||I would just suggest going to the junkyard/scrapyard to see if you can find one in a wrecked Jeep first... Mine actually went bad the other way in mine, they would ocme on by themselves. So I just pulled the fuse and took the lights off with my new front bumper.|
|08-20-2006 01:34 PM|
My factory fog lights (03 Wrangler Sport) apparently died. The light indicator on the dashboard doesn't even come on when I try to turn them on. I just put in a new relay and still nothing. I have a feeling I'll need to replace the entire light control arm by the steering wheel. Any suggestions in trying to avoid going to the dealership? Thank you!