|02-08-2012 09:56 PM|
|Bills98TJ||I had the same problem..I bought some 3/4 LEDs with grommets from eBay. They are 2 wire LEDs and you will have to go to radio shack and make a board if you want them to be used as markers and turn signals. There is a thread for this issue, and it worked out great. I believe there is a thread for drilling underneath the headlight and installing the 3" LEDs as well. Hope this helps|
|01-29-2012 04:29 PM|
Front Turn Signal help
So i finally got my smittybilt front tube fenders and back corner guards on (lookin pretty good) but with the front fenders on i dont have front turning signal lights anymore which means im rolling around with the loose wires zip tied to the inside of the bumper for now. There is a small hole and i read that a 3/4 led could fit it. Would the loose wires that i have now be able to hook up to something like that? I dont want to do anymore cutting or anything to install a new front turning signal lights.