|01-07-2013 11:33 PM|
I have a 2006 4.0 Unlimited with 126,000 miles. My husband hates it when I read this forum and find things like this. Then I ask him to check it or show me how to check it. I am the second owner - don't know if it was checked or replaced before. Guess he is going to give me 'the look' tomorrow.
He has a '98 CJ (Hiding behind mine!)
|05-30-2012 07:27 PM|
|05-30-2012 06:55 PM|
|RUBI 4 MY MRS||To clarify, that is a reference to a TSB for SOME early '05 TJs. It was for ones with specific build dates AND 8 in the 8th position. Meaning only 4.0s within those build dates. That has nothing to do with the present OPDA issues. It was to replace some faulty gears. My LJ falls within those dates & had the gear replaced. In just over 20k miles there was some shaft binding & the replacement gear had excessive & uneven wear.|
|05-30-2012 03:57 PM|
I just want to mention concerning the OPDA that there is a link in this string which says the 8th alpha-numeric position of the VIN number, if it is an "S" indicates a potentially faulty OPDA. This is incorrect according to the Jeep/Chrysler Service Shop Manual for the 2006 model year.
According to the manual it states that an "S" in the 8th position merely indicates that the jeep came from the factory, with a 4.0 I6 engine. The only other number/letter possibility for the 8th position in the VIN is a "B" which designates a 2.4 I4 engine. Only an S and a B were used in the 8th position.
In all probability, something this simple would likely translate to all of the TJ years.
I am not trying to minimize the OPDA problem, but merely trying to clarify what I read in the manual.
|05-30-2012 01:36 PM|
|Rayko||05 with 90K on it. No problems, my mech pulled it yesterday morning and said it was OK.|
|05-30-2012 10:13 AM|
Just a thought:
Consider the OPDA to be much like a timing belt. It could last the life of the vehicle without failing and most will. But if it does fail, it could be very expensive to fix depending on the other damage it causes when it does.
It is relatively cheap and is about as difficult as changing spark plugs to replace.
|05-29-2012 10:41 PM|
|crisjacof||I got 66k on mine and no problems, I'll check it soon. Just to be on the safe side.|
|05-29-2012 09:45 PM|
|05-29-2012 09:29 PM|
|silver rubi||how do you check to see if it has premature wear? I have a 2006 Rubicon with 200000 miles on it.|
|05-29-2012 03:20 PM|
|05-29-2012 11:59 AM|
|05-29-2012 12:25 AM|
|RUBI 4 MY MRS||Punch the pin out & slide the gear off & the shaft comes right out. At least lube the shaft & top bushing with some oil if putting it back in for now. WHATEVER YOU DO, MARK THE GEAR POSITION. IT MAY LOOK LIKE IT GOES BACK ON EITHER WAY BUT THE HOLE IS SLIGHTLY OFF CENTER & IF YOU TAP THE PIN BACK IN IN THE WRONG POSITION IT WILL BREAK THE GEAR EASIER THAN YOU MIGHT THINK!!!!!!!!!! If you already have it off without marking just know it has to line up exactly & if you try it both ways it will be obvious which way it goes.|
|05-28-2012 11:14 PM|
|SeVeReDiStOrTiOn||Does that roll pin just punch out? I didn't remove the target wheel because I wasn't sure it the pin was reuseable.|
|05-28-2012 06:21 PM|
Post up a pic of the shaft itself, that is where I had issues.
My new/modded OPDA cured my rough idle issue.
|05-28-2012 02:26 PM|
So yea I pulled mine a few minutes ago and at 57k there's a lot of wear...i'm going to replace it as soon as I can. I ended up putting a light coat of marine grease on the OPDA to cam gear. I don't think it'll help put you never know and it's a light enough coat that there shouldn't be any probs. A few pics..
Wear on OPDA gear
Wear on cam gear...could this cause my low and rough idle?
The seal under the target wheel seems to be getting lubed with oil but it's hard to tell in tyhe pic. The shaft spins easily but the wear worries me.
|05-28-2012 12:36 PM|
|SeVeReDiStOrTiOn||I'm going to pull mine and check/lube it today. Is there a certain lube I should use and which bearing/part of the shaft should I concentrate on? I have some marine grade grease that I used on my slip yoke...I also have a jar of knickel anti-seize floating around.|
|05-15-2012 01:21 PM|
|05-15-2012 01:14 AM|
|TJDiver||Just re re-ask a question i saw posted, is this an 06 2.4L problem, if so id like to know as i have my transmission and transfer case out right now, and would like to do any engine work before i reinstall. Thank you in advance!|
|05-15-2012 12:45 AM|
|booty900||I might be buying an 06 LJ with 103,000 miles on it. Can I be pretty confident I won't have this problem?|
|05-14-2012 11:22 PM|
My final mod.. Abnormal wear on my original and had 44000.. Cam gear worn slightly but did not replace cam gear
|05-14-2012 11:18 PM|
|05-14-2012 08:43 PM|
Sorry I couldn't load the pictures of Customized OPDA so please see website:
Check out my website & look on the last page called "JEEP" for pictures & info.
|05-14-2012 07:33 PM|
My mechanic checked my 2005 Jeep TJ's OPDA at 58,000 km (Canada) & it had abnormal wear, so replaced it with new but customized OPDA.
The upper end/top bushing can't get any lube due to the oil seal being beneath the bushing. Just a matter of time & I wasn't going to take a chance, so called in my son-in-law & his father for the cure/fix. OPDA was taken to an elderly machinist who did an excellent job of the customizing!
- The custom upgrade included machining the casing to insert a larger brass bushing for the sealed bearing to fit into & then another small brass bushing to fit inside the sealed bearing to allow a proper fit for the shaft to slip through - working great so far & oil pressure is up.
Also added 10W40 Amsoil high zinc oil, which also helped the oil pressure & protection for the hot running 4lt / in line 6cyl motor.
Now much more relaxed when driving my Jeep!
Please email me for pictures & video explaining the procedure.
Grant - "Bentley Jeeper"
|03-26-2012 10:27 PM|
|RUBI 4 MY MRS||No!|
|03-26-2012 09:25 PM|
|SilverTJMike||2 05's a TJ and a LJ, 76 and 106K respectively. No wear on either. 4.0 always seem to have high oil pressure from my experience. Did Chrysler ever fix this issue with a new OPDA?|
|03-16-2012 02:34 PM|
|the great moo||I have noticed a ticking from under the hood. I ruled out all traditional nocking issues, my oil presure has been a little higher then i like. Could this be a sign? About what is the repair cost doing it your self?|
|03-15-2012 02:15 PM|
|carl d||When i sold mine a month ago with 70000 miles, no problems.|
|03-15-2012 02:09 PM|
|06GoldenEagle||so was this all 05 06 4.0Ls? was it something that was part of a recall? i have 77k miles and just want to know if its something thats on the horizon or was something that wasnt involving all the 06s|
|03-15-2012 01:41 PM|
|RUBI 4 MY MRS||Sometimes you get the "laughing monkey" squeal on cold start ups but other times no warning. Don't believe it? go to this link 2005-06 Jeep OPDA_CPS_Distributor Failure - Page 189 - JeepForum.com|
|03-14-2012 11:31 AM|
|the great moo||I have around 100k on my 06 right now and don't think anything has been done about this. What symptoms comes with the problem? As of yesterday when I did a live data read on the Jeep with the scanner the only issue I see is that my o2 sensor is on its way out. If this is a common issue i would like to catch it right away.|
|This thread has more than 30 replies. Click here to review the whole thread.|