|03-07-2008 09:07 PM|
|03-07-2008 03:02 PM|
a 1 inch bl works... its what I use with my 1 inch mml
you prob have a fuel filler hose extension ... you'll need to remove that or shorten it.
daystar makes a great 1" bl kit... replaces the stock bushings completely instead of stacking.
if you cut your existing bl down to a 1" then you obviously will need to buy new bolts too. the current 3" bl bolts wouldn't have enough threads remaining if you were to cut them down
|03-07-2008 02:38 PM|
|tazmann910||Cut the 3" down to 1" and get some new bolts..should be good to go. Actually be different and do a 1 1/2 inch body lift...|
|03-07-2008 12:39 AM|
If I remember right you need a 1" body lift for the 1" motor mount lift
|03-06-2008 11:52 PM|
|Triple88a||I would buy a 2" bl as it comes with everything needed such as steering bolts and radiator brackets and fuel filler pipe and all that while a 1" bl does not include those since it uses the stockers.|
|03-06-2008 11:33 PM|
removing body lift, possible motor mount lift poblem.
im removing the bodylift from my jeep tomarow and i just thought about the 1 inch motor mount that i have installed. I currently have a 3 inch. Will i have problems with 1 inch motor mount lift i have. If it is a problem, how much bodylift do i need to make it work? i can always cutt the 3 inch down as much as possible to make it work.