|Yesterday 09:07 PM|
|Yesterday 08:59 PM|
|Howlie||Installed my spiderweb shade fits great, too bad it's almost time for the top to go back on|
|Yesterday 08:54 PM|
|Yesterday 07:31 PM|
|Yesterday 07:06 PM|
Got up this morning and washed the wife's car and the Jeep. Then one of my buddies came by and said hey, I heard about this spot to play around in close by...so we went.
Then after a trip to the carwash and a hand wash at the house...
My dog is checking out the smells. Some of it was that foul smelling gray stuff.
|Yesterday 06:23 PM|
|Yesterday 06:10 PM|
Pulled up the passenger carpet to assess the floor rust. Also got my new welder and welding cart put together. Some pics below:
Pass floor rust before
After some wire wheeling....
Love new toys ....
|Yesterday 05:54 PM|
|Yesterday 05:47 PM|
Got my new trucklite LED headlights installed. These things are very nice, worth every penny.
|Yesterday 05:23 PM|
|Yesterday 05:19 PM|
|Yesterday 04:58 PM|
|PantherWingsfan||Since Thursday I got the lift on, plastidip on the wheels and undercoated the frame. Now I need bigger tires. Lol|
|Yesterday 04:58 PM|
I used the Raptor liner kit when I did my interior. Was a bit nervous at first but this stuff is amazing! Good choice!
|Yesterday 04:56 PM|
|Yesterday 04:08 PM|
|gnater76||Yes it does. More than the factory texture but less than some others. Herculiner, monsta liner, line X, etc all pretty similar. I chose this because the kit included everything I needed. It's hard, not "rubbery". You could add thinner and smooth it out or run higher air pressure. I used 50 PSI.|
|Yesterday 03:33 PM|
|clull05rubi||Looks like its just a nock off monstaliner but im sure its nice|
|Yesterday 03:30 PM|
|Yesterday 03:24 PM|
|Yesterday 03:09 PM|
|Yesterday 03:04 PM|
Raptor lined my hardtop! Very impressed with the spray gun kit from U Pol. Painting doesn't get much easier than this.
Used a power sander and red scotch brite to scuff, rinsed with acetone then shot it outside in my driveway. Use a big drop cloth and take your time on prep. I also recommend a 3m vapor respirator as this stuff is very volatile.
|Yesterday 12:19 PM|
|Yesterday 12:12 PM|
|DBoat||Drove it in Moab last two days. Steel Bender on Fri and Hells Revenge yesterday. Tried to take a difficult double step and bent an lca and the track bar. Waiting on the shop to fix it enough to tow it home. But the Silver Surfer made it all the way through the trail without any help.|
|Yesterday 11:56 AM|
Had to put the hard top on :-(
But at least my hard doors will be done getting my custom paint job and tinted this week :-)
|Yesterday 11:43 AM|
|Rock Kicker||Noticed my rear axle is leaking all over my rear driver's side brake housing...time to start pricing axle seals. May just upgrade my stock Rubi axle shafts in the process...suggestions for brands?|
|Yesterday 11:30 AM|
|Yesterday 10:39 AM|
I'm scrambling to get her back together by Wednesday, heading to KY on Thursday for Jeep Jamboree, so I'll put this repair to the test.
|Yesterday 10:21 AM|
This afternoon, after much grinding and wire wheel.
|Yesterday 09:49 AM|
|Ggomez21||I had the tire shop install 33" KM2's.|
|Yesterday 08:59 AM|
It is like the lift kit install was constipated and yesterday the jeep shat the bolt. It feels like all is well, now.
I still have the frame side rear track bar bolt, which is rusted into the bushing sleeve. I ended up tearing the sleeve loose from the bushing. Only way to remove it now is to cut it out. The nut is off. The bolt will be pretty easy to get out with the tire off and spring out of the way.
Last bit is two snapped off upper, rear shock bolts. Everything else came off, though not without a serious fight.
This jeep, man...
|Yesterday 07:15 AM|
|Jeepah||Perfect! Fine choice of beverage!|
|This thread has more than 30 replies. Click here to review the whole thread.|