|03-11-2008 09:40 PM|
|bluvikng||Not as much as you would think. I think it cost him $200.00, but we have a galvanizing plant close by.|
|03-11-2008 09:37 PM|
|jpdocdave||ah, there's a good idea, know how much it set him back?|
|03-11-2008 09:32 PM|
|bluvikng||I have heard of people dipping the frame in galvanizing metal. Then painting over that. I don't think that would ever rust. A club member did that, to his frame, turned out great.|
|03-11-2008 09:21 PM|
ya, trust me i wish i had about 12 large layin around and i'd just build the sucker. i gotta save for every step, but i'm not gonna cut corners, i am gonna do the best with in reason
to do a real good long term job, while the frame is off, it would require many hours of clean and prep, probably 20 easy, cleaning chemicals, wire brush wheels, sand paper, etc, primer, paint, under coat. probably easily run close to 300 bux easy, plus time.
nothing is gonna get cleaner than dipping it, thats 100%, i couldn't do that good myself. and if powder coat is gonna last better its worth spending 3 or 4 hundred more. if you don't do a good job on this stuff, you might as well not do it ya know, it only lasts a few years. i'm gonna keep this and my 4 year old can drive it some day.
|03-11-2008 09:07 PM|
I meant exactly, that only show vehicles would go to that extent, and $$$$$$$$
A good paint job, undercoating afterwards, will do just as good. All can be had from a rattle can.
|03-11-2008 09:05 PM|
what about line x products, or else i'll just clean, paint, and undercoat the frame
|03-11-2008 08:55 PM|
|03-11-2008 08:53 PM|
ya, thanks guys, rocks are gonna beat anything up. i just know that the rear sections of the frames on these likes to rot. and i don't know how i found an 87, in my area 95% rust free. i sold my first yj, and i'm gonna keep this one forever, and do everything right.
and ya gotta wash em after wheeling, either spending about 20 bux at the car wash till they kick ya out, or a couple hours at home with a power washer, and garden hose.
haven't decided yet, but i'm leaning toward it, how many people powder coat the frame on their jeep, maybe just show trucks.
|03-11-2008 08:40 PM|
|bluvikng||Rock is very abrasive, and with paint, you can easily touch up the scratches. Not so, with powder coating.|
|03-11-2008 07:46 PM|
|HighTechRedneck||Well he said it's going to be off for a little bit so I guess it wouldn't hurt anything. Little protection is better than none right? I mean there is a lot of other things you can spend your money on that would be better than this, but if your really wanting to try something on the frame might as well give it a shot. Never hurts to try...heck might be better than expected. Just remember it's your decision, not ours, we're just here to help.|
|03-11-2008 03:53 PM|
The undercoat won't help much with the rocks, (IMHO) and you'll still have to wash the underside anyway, once you get mud on it, because you'll get mud on your brakes, engine, etc...
|03-11-2008 08:50 AM|
|03-11-2008 06:08 AM|
Lots depends on the kind of riggers you are going to put your vehicle through.
If you live in a place where you get snow, and they salt the roads, it will help with protection against pre-mature rusting.
If you are going mud-bogging, it is gonna help, but there are other concerns as well.....
I'm assuming it is somewhat costly......who's picking up the tab???
|03-10-2008 09:17 PM|
Yes, powder coating will take more abuse than paint will, but just like anything exposed to salt, it takes its toll.
|03-09-2008 10:01 PM|
|jpdocdave||i didn't think of that on the frame, i'm rhino lining the tub inside. would that hold up on the frame? sounds like a good idea? anyone done it?|
|03-09-2008 09:53 PM|
|HighTechRedneck||The bed in my Z-71 is Line-X'd and I give it heck with loading and unloading atvs, tools, and all kinds of stuff and it's holding up pretty darn good!|
|03-09-2008 09:41 PM|
|AzTJ||What about getting it Line-X'ed or Rhino lined?|
|03-09-2008 09:23 PM|
|jpdocdave||thats what i'd think, do you think about 500 bux better?|
|03-09-2008 09:05 PM|
|HighTechRedneck||You'd think if prep. right that the powder coat would last longer than just a clean and paint.|
|03-09-2008 08:59 PM|
|jpdocdave||thanks kenny, i'm trying to decide between powder, or clean, paint, and undercoat. what do you think, if i scrape it up on rocks will powder hold up better or worse?|
|03-09-2008 08:35 PM|
|03-09-2008 08:27 PM|
Powder coat frame?
hello everyone. i'm thinking about powdercoating my frame while it is off. i'm not real familiar with powder coat, i believe it is supposed to hold up very well, anyone have any experience with it, is it worth the cost? i can have the frame dipped, so it is 100% clean, then powder coated, to the tune of 700 bux. opinions welcome. thanks