|02-21-2012 02:59 PM|
I think I just need a longer extension for my breaker bar.
All of my bolts are 18mm including the top.
|02-21-2012 01:11 PM|
i was able to do it through the shift cover. did you remove both panels or just the smaller one? you need to remove both.
also, they are not a hex head IIRC.
|02-21-2012 11:19 AM|
|JeeperRob||How did you guys get the very top bell housing Bolts out? I removed the shift cover from the inside and they are still in a position that I can't turn a wrench? What tool did you use?|
|02-20-2012 06:50 PM|
|Garyk||I am sorry but can't help you, all I know is that these damn jeeps have both metric and sae bolts on them. I seem to recall that I used sae on the motor mounts..and the bell has different sizes too but I think all those are metric..|
|02-20-2012 05:44 PM|
Sorry guys I forgot to mention I have an 89 with a 2.5. Ax5
|02-20-2012 04:16 PM|
|rebelBullDawg325||i cant recall what i used on my motor mounts, but the bell housing bolts were 3 diff sizes. top, biddle, bottom, were all different on mine.|
|02-20-2012 03:44 PM|
Motor mount and bell housing.
Hey guys I need some help can't figure out what size socket to use on the motor mount and bell housing bolts. Both 11/16" and 18mm fit snug. Problem is only some of my 11/16" sockets fit... Not all of them. Seems strange but it could just be the dirt. But I didn't think it would be a metric size either. What size do I use. I don't wanna round these heads off! Thanks for the help.