|08-28-2013 06:57 PM|
|Mykul||Here's all I did, fabed a couple brackets at work, and stuck some cheep mirrors on them.|
|08-27-2013 10:31 PM|
|08-27-2013 10:16 PM|
|kajunrunner||I use two left side Harley mirrors. And I just flip the passenger side upside down on the top hinge. Pokes out just perfectly below the curve of the glove box. They were just barn leftovers so they don't even match lol. Idk how it is everywhere else but Louisiana law states that you only need a left hand mirror to see 200ft behind you. A right hand mirror is not needed unless your interior rear view mirror is obstructed... Or just missing|
|08-27-2013 09:49 PM|
|hipshot33||x2 on the outlaw mirrors... install in about 30 seconds and no vibration....|
|08-27-2013 08:58 PM|
|Mom sold the Jeepster||I've seen good pictures of a mirror clamped onto the roll bar, thread is on here somewhere|
|08-27-2013 08:44 PM|
|08-27-2013 08:39 PM|
Then you have had much better luck than I...
What year is your jeep? I have a 2007 and there was no amount of fixing them so that they would work. Attachment 291429 That is the view I had after two hours of playing with them... Not only did I adjust the mirror and bracket to every conceivable position, I adjusted the seat into quite a few that I found rather uncomfortable for sitting, much less driving, in an attempt to make them work.
|08-27-2013 07:47 PM|
|08-27-2013 07:30 PM|
|Calvin9069||Made the mistake of buying the Rugged Ridge mirror relocation brackets which appear to be a clone of the ones I could buy from the Jeep dealership... Either way, the passenger side mirror, regardless of whether the doors were on or off, was functionally useless. It looked like a mirror, and if the goal was to see the neighbor's house when I backed into my driveway, then they are the way to go. If you actually want a mirror on the passenger side of the Jeep, probably best to skip Rugged Ridge altogether and find a different form of mirror when the doors are off. Got new mirrors coming tomorrow... Just in time to miss my day off completely.|
|08-27-2013 07:19 PM|
|08-27-2013 06:13 PM|
|nojeepyet||Now I have some good ideas to go on|
|11-03-2012 11:26 PM|
|11-03-2012 11:10 PM|
I have these and LOVE them
DieTech Offroad JK mirror relocation bracket install - YouTube
|11-03-2012 07:49 AM|
|11-03-2012 07:23 AM|
|11-03-2012 01:17 AM|
Uploaded with ImageShack.us
Found mirror at flee market and had some all thread lying around. .
|11-02-2012 11:54 PM|
|11-02-2012 11:32 PM|
|2resa||I have the Rugged Ridge setup. Kinda think they're a pita. They loosen easily and then when I'm going down the interstate, the wind pushes them in. Plus, it takes two people to adjust the passenger side. However, I'm still using them b/c the hinges are used by the OR Fab doors and they were a relatively cheap option.|
|11-02-2012 11:17 PM|
I did use the washer. Here's a pic. Where are u talking about scratching?
|11-02-2012 10:22 PM|
|ibrown3005||4x4cop, jeepdrivengirl, did you end up using a washer on the bottom bolt? I was having an issue with it chipping the paint in the lower hinge. 4x4cop be safe brother.|
|11-02-2012 09:42 PM|
Got mine from Defiant Systems also...love them!!
|11-02-2012 05:25 PM|
|4x4cop||Got Defiant Systems and love them. Easy on and off. Chk them out!|
|11-02-2012 05:06 PM|
Love mine but they are off now that Winter is here and the hard top on.
|11-02-2012 03:45 PM|
Here's my version and cheap @ $4.99, ...Bicycle mirrors!
|11-02-2012 02:35 PM|
I modified my RR CJ style mirrors from my old TJ and installed them on the JK after removing the OEM mirrors from the doors, color matching the filler plates and I've been happy with the results. No problems with the curbside mirror and no vibrations.
|11-02-2012 12:14 PM|
I love mine.
|11-02-2012 12:03 PM|
+1 for the convex mirror stuck on the vent.
Side note for everyone using the motorcycle mirrors, apparently if you put the passenger side mirror in the lower hinge, you can actually see out if it. Haven't tried it myself, but remember someone here saying that.
|11-02-2012 12:03 PM|
|ibrown3005||Defiant systems off road mirrors. Thread on this forum. Love mine!|
|11-02-2012 11:57 AM|
Question, do they stay put at highway speeds?
|08-12-2012 01:02 AM|
i made mine from 3/4 inch tubeing bent at both ends and bought 5x7 inch mirrors for $10.00 each at advance auto i got the idea from here
Jeep Doorless Budget Mirror Mount theres a pic of mine on my profile i cant seem to get one on this reply they vibrate bad but i use them for lane changes and backing up but for $23 out the door u cant beat it
|This thread has more than 30 replies. Click here to review the whole thread.|