|Yesterday 10:53 PM|
|Yesterday 09:35 PM|
|Yesterday 05:44 PM|
|tbensor||Almost sunk it in a "small" mud hole. Sunk 14 inches to the skid Plate. I should have known better|
|Yesterday 08:11 AM|
|Yesterday 03:02 AM|
|04ORX||There is frame damage. Not sure how bad. Won't know till Tuesday or Wednesday what the verdict is. Depending on what they would want for me to buy it back, I might try to swing it. I was actually in the process of trying to find a 4 door and trade this one in. I already had a bid from a wholesaler on it for 9500. I owe a little more then that on it. I'm really hoping that I get what I owe at least.|
|07-12-2014 07:56 PM|
|07-12-2014 06:10 PM|
|07-12-2014 05:30 PM|
Did some work underneath today.
Much needed too. Car has been a DD for the last 10 years. I want it to last another 10 so I POR'd the external frame, where I could easily reach. I used Eastwoods internal frame coating too.
Got new pads & rotor while I was at it too, just in time. Onto the front end.
|07-12-2014 01:26 PM|
Rubi Locker Switch Bypass - 1
|07-12-2014 12:53 PM|
|vanillathrilla||Anyone interested in two moderately low tread 33x12.50x15 MTR/K's for a trailer or anything? Tread wear is not the same on each, unfortunately, but I'm sure someone can use them. The sidewalls are virtually untouched|
|07-12-2014 12:42 PM|
|07-12-2014 07:02 AM|
|07-12-2014 05:27 AM|
|07-12-2014 02:47 AM|
|04ORX||Think I totaled mine.|
|07-11-2014 11:57 PM|
|I-Want-A-Jeep||Got rid of the awful front end noise by tightening my sway bar links!|
|07-11-2014 11:32 PM|
The whole kit went in smooth as heck. I have no vibrations, my 33/12.5/R15s don't rub and so far everythings great. knock on wood.
good luck with your install.
Hardest part is not mixing up bolts/nuts that you need to reuse or mixing up part bags. All though the part bags are labeled to make that unlikely.
|07-11-2014 11:26 PM|
|07-11-2014 10:44 PM|
|Cannierdr||Replace my ignition actuator pin ....yeah !!!!!!|
|07-11-2014 10:07 PM|
Anyone ever use a 10"speaker grill for a hood vent with a 9" fan?
I want to vent the engine compartment if stuck in traffic or slow moving on trail...and am wanting to do something different.
|07-11-2014 08:42 PM|
|07-11-2014 06:55 PM|
|07-11-2014 05:02 PM|
|Ggomez21||Had a front bumper made and put on. Yay!|
|07-11-2014 04:54 PM|
|Deem05||Took the doors off (first time), made and sprayed (or rather dipped) my drivers side mirror and bracket.|
|07-11-2014 04:07 PM|
|Lumberjack||Decided not to sell my Rubicon after debating all week. Thanks to all on here who helped me with the advice and to my financial advisor WAIT...is this even ok to be posted here? I guess I did do something to it right|
|07-11-2014 02:10 PM|
|hondamxer||Rubicon locker mod. Best thing iv'e done to the jeep. Plus it's free!|
|07-11-2014 02:06 PM|
|DmnSlyr||Well not today but last weekend installed some fun cheap lights. Led rings in the lights can be 8 different colors. Pretty cool for a poor college kid|
|07-11-2014 12:38 PM|
|ninjaturtle0||Drove topless and doorless to a job interview|
|07-11-2014 12:28 PM|
|07-11-2014 12:07 PM|
|tbensor||Installed new speedometer gear to get an accurate speed back on the jeep. Tracked it with GPS and my speedometer is now dead on. It was 5-7 mph off before|
|07-11-2014 11:47 AM|
|This thread has more than 30 replies. Click here to review the whole thread.|