|10-25-2014 05:36 PM|
KC HiLiTES 7400 - KC HiLiTES Bumper Hoop Bar with 2 Light Mounts for 97-06 Jeep® Wrangler TJ & Unlimited - Quadratec
I think there is a 3 tab (light) one also.
|10-25-2014 04:40 PM|
|10-25-2014 02:38 PM|
|Jpjr21||I got the front 2 off ebay for $15 shipped. The dealership here quoted me $70 a piece. I don't know what he looked up because when I called back with the part number, they quoted me $10 a piece.|
|10-24-2014 06:37 PM|
I took off the milk jugs and put these on, more expensive then the flat ones, but i like the way look more than the flat ones.
Armadillo Industries 11902 - Armadillo Industries Xtreme Front Bumper Ends for 97-06 Jeep® Wrangler TJ & Unlimited - Quadratec
Looks like they don't sell them anymore....But you can find them other places via Google.
|10-24-2014 05:44 PM|
I bought mine off Amazon. PO had removed the milk jugs, but it wouldn't pass the yearly safety inspection here without, so I picked up the flat ones.
I think I paid somewhere around $30 for all four.
|10-23-2014 07:30 PM|
is that the stock bumper with milk jugs taken off, and then u cut it down further, rly nice
|01-13-2011 04:00 PM|
|T'sTJ||Thanks a bunch.|
|01-13-2011 02:00 PM|
|01-13-2011 01:48 PM|
|InfernoGirl||Yes. They're all the same. They came stock on '06's....|
|01-13-2011 01:47 PM|
My dealer wants $12 x 2 and $5 x 2. Too much?
|06-23-2010 08:12 PM|
|lancetkenyon||Whew! I thought this thread was going to be about breast reductions with the way I read the title......|
|06-23-2010 01:44 PM|
|Hawaii 5-0||Got my flat caps at the dealer today for $6 and change.|
|06-20-2010 07:02 PM|
I cut the ends off at 30 degrees. Then cut and welded some plates to cover the end.
|06-18-2010 06:32 PM|
|06-18-2010 03:38 PM|
|drivebytruckerz||I had my dealer order them. You're probably dealing with incompetence.. Try another dealer or buy them online.|
|06-18-2010 03:25 PM|
|K.C.'sJeep||Called the local jeep dealer to see if they had any of these in stock or if they could order them. I gave them the part # and they said that they didn't have them. They also said that they couldn't order them because they weren't showing up in the warehouse. I'm gonna try the jeep dealer in the country and the one across the river and see what they say. It makes no sense that everyone else can get them but these guys can't.|
|06-18-2010 11:45 AM|
Those must have been the gold plated ones.
The caps didn't show up here until the 2006 "X" came out. They are plastic and I used the screws from the "milk jugs" to install mine. Guess you could also used the plastic "push in" type fasteners. Then there's always J-D Weld, gotta love that stuff, but I wouldn't use it there.
|06-18-2010 10:53 AM|
|InfernoGirl||What you need are the end caps for an '06. They are less than $8 a pair from most dealers. If you can't find them, let me know and I'll get you a pair and send them to you.... You really shouldn't even need the part #.... They are plastic, fwiw...|
|06-18-2010 10:48 AM|
|drivebytruckerz||There's a part number on this thread. I used it and got them for 3.50 each.|
|06-18-2010 10:39 AM|
|sycamore007||i had to do the same thing as Inferno but, i need to go back to my dealer. i called in about 3 weeks ago and he quoted me $47 for just the pair of fronts and they weren't even steel! thank for the part numbers because we just lost our local dealership and the MOPAR guy didn't seem to know what the hell i was talking about.|
|06-16-2010 04:40 AM|
|Ageless Stranger||The only picture I saw was a cut up stock bumper.|
|06-16-2010 04:34 AM|
|jeepr||is that a cut up stock bumper or a new one?|
|09-27-2009 06:15 PM|
|theducman||I think this tread just saved me some dough. I wanted to get a new bumber but I like the way the stock one looks without the jugs. Now, I just need a bar to mout my new fogs??|
|09-18-2009 08:46 AM|
|InfernoGirl||Changing the front end caps is the best thing I've done for my Jeep so far.... Cost $7.70 for the Mopar parts from my dealer. The hardest part was taking off the old milk jugs. 9 years of mud and crud pretty much destroyed the little clip thing inside them. Ended up kicking them off, since the clips just spun around on the bottom. Save as many of the clips as you can, I know you need at least 4, maybe more. I ended up using some lock nuts and nuts to hold the unused screws in the top of the bumper, cause I didn't like the look of the empty holes.|
|09-18-2009 07:21 AM|
|meyers||Anyone ever gone for this look on their jeep !!|
|09-18-2009 03:29 AM|
I took the plasma cutter to mine and like the new look alot.
Check out pics on page 5 at this url
|09-16-2009 02:07 PM|
|NWPATJ||Sounds good going to call dealer tomorrow. Called today but they wouldn't pick up. I saw them at a car show and thought they were cool as hell. Beats changing bumpers right now. I really don't like the way the back looks but I can live with that.|
|09-16-2009 12:14 PM|
Thanks for sharing that!!!! I was also looking to clean up the look of my bumpers until I can afford something nicer/better!! Never knew those existed!!!
|09-16-2009 11:53 AM|
|glock22ed||I just put on the front and back end caps. Cheap investment until I can afford new bumpers. Cleans up the look of the bumpers.|
|03-20-2008 02:20 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|