|01-25-2014 01:07 PM|
I'm still wondering what works best on the black fender flares, trim, bumpers, etc. All the black stuff on the outside of my '03 Wrangler X seems so faded and dull. I've tried Armor-All, then realized this isn't such a good idea and is temporary. I've tried Mother's Back to Black. Again, another temporary fix. I may have even made them worse, who knows?
So is there even a miracle product that works wonders on all of the black trim on Jeeps?
|03-06-2012 12:27 PM|
|rvanbure73||You will change the structural integrity of the plastic with the heat gun & they will become brittle & not flex if you rub against a tree or rock. Its a good trick to use if you smash one or bend it real bad & end up with the white color where it over-bent the plastic. Used it several times on my quad plastics to re"melt" the plastic molocules back together. I used good old fashion pledge furniture polish on my top to make it look like brand new the first few times I polished up the Jeep, before desired & undesired body mods & pinstripes were added, now its just a pressure washer, glass cleaner and spray paint lol. No matter what you do your going to have to keep up on em unless you remove & paint them gloss or matt black depending on your taste or rig color! CYA!|
|03-04-2012 10:47 AM|
^^ I've pretty much decided that when my flares start getting faded, I'm going to use the heat gun.
From what I've seen/read, you just have to use caution around the paint if you don't remove the flares as the paint can bubble if you hold heat to it too long. Just keep the heat source moving and you shouldn't have any problems.
|03-04-2012 09:27 AM|
|Beaker541||I saw a heat gun trick on YouTube ... Has anyone done this ? Looks too easy|
|03-03-2012 11:56 AM|
|LilYeller||Turtle wax "ice" total interior care is good for cleaning them up. But if you want to renew them from faded gray color then I suggest painting them with either plasti-dip or Krylon Fusion paints. there are many writeups on doing this so search away if youre interested.|
|03-03-2012 11:47 AM|
|BayouBengal||i just use armor all wipes or spray. it lasts for a few weeks until its time to wash again|
|03-03-2012 11:17 AM|
|jgorm||I used armor all once with excellent results. It took a few coats, but turned them from gray to black. That was on my last 02 TJ and my 06 still looks great so no treatment yet.|
|03-03-2012 08:32 AM|
|jefferyfghezzi||Mother's back to black|
|03-02-2012 11:48 PM|
|03-02-2012 08:28 PM|
|I-Want-A-Jeep||It would if you left them soaked. Use it very sparingly and buff with a dry microfiber to spread|
|03-02-2012 05:57 PM|
|03-02-2012 03:32 PM|
|03-02-2012 12:46 PM|
|03-02-2012 12:43 PM|
|03-02-2012 12:34 PM|
|03-02-2012 11:43 AM|
|rvanbure73||Just puttin it out there all......but the "Mr Clean Magic Eraser" sponges clean anything off anything, honestly & truly, brake dust buildup that wont wash off, the scuffs from your kids bikes, shopping carts or car doors, the black or white scuffs on your bumpers from people who cant park, the yellow from the big steel pipes people never seem to see & run down the fender edges or anything else that your wife never seems to see or know where it came from........ and the sap from tree branches getting drug along the side of the rig, thats usually me not her unless she drives through the shrubs in the driveway, its happened lol it takes em all off without hurting the paint.|
|03-02-2012 11:02 AM|
|03-02-2012 10:49 AM|
|dabolt55||Brought some color back on my buddies jeep using 303 aerospace, or mask and spray away, that seems to work 100% of the time...|
|03-02-2012 10:43 AM|
|wwch99tj||Heat gun or krylon fusion paint|
|03-02-2012 10:38 AM|
|wedu22||Hi Beaker, you might want to Post and/or search this question in the TJ forum.|
|03-02-2012 10:20 AM|
Cleaning Black stock fender flares ?
Ok I'm picking up my (new to me) 06 Rubicon on Monday and I'm wanna clean it up before I get it dirty... What is the best way to restore the fender flares ?