|08-27-2013 10:16 AM|
|08-27-2013 07:48 AM|
Now, If you wanted 33's and lets say that I removed the Fenders off the sides of the jeep for more clearance.. Would a 2.5" lift be enough??
Here is my TJ as it stands with 31.9x10.5 Dick Cepek Bone Crushers... on 15x8 4" bs.
With a 2.5" SL, you think 33x11.5's will work?
As I read this, Im under the impression that after a 2.5" Lift, I DONT need to replace my Drive shaft... only if I wanted to go above 3", I would have too....
|03-03-2012 09:03 PM|
|03-03-2012 04:27 PM|
|03-03-2012 03:23 PM|
|03-03-2012 01:38 PM|
|03-01-2012 08:46 AM|
|02-29-2012 11:54 PM|
You forgot the part where he asked for something inexpensive.
If all you want are looks go with 2" BB and 1.25" BL. Put on 33's and add appropriate bumpstops. Done and cheap.
|02-29-2012 10:09 PM|
|wavebacktothetj||I am going to make this very simple for you click the link call and ask for dirk and get him to set you up with a high quality kit I have this as do many others on this forum Old Man Emu Ultimate TJ/LJ Wrangler Kit | dpgoffroad.com there ya go you will not be dissapointed|
|02-29-2012 10:08 PM|
|cadenas||Yea I'm going to order it tomorrow. Been doing my research for the last few months. I know it ain't the best lift kit but its pretty good for its price and haven't heard anything bad about it|
|02-29-2012 10:04 PM|
That zone 4.25 is sounding good, fyi
|02-29-2012 09:59 PM|
Thanks everyone for their info and input. I'm going decide on something real soon.
Please keep putting up new info if you know anything. And I'll upload pictures in a few weeks when she's all done.
|02-29-2012 09:49 PM|
|02-29-2012 09:39 PM|
|02-29-2012 08:48 PM|
|02-29-2012 08:35 PM|
my tj came with a 4 inch lift, 32's too, so I'm gonna put 33's on it soon =) and a 1.25inch bl and flat fender kit, should end up looking great and wheeling pretty well.
wish i had a 6inch long arm kit with 35's 488 gears a ford 8.8 rear axel and a 44 front locked up on black crawler rims, but what other jeeper wouldnt
|02-29-2012 08:30 PM|
|mitymouse||If you do a zone 4 inch you dont need sye,driveshaft, or any extras. you can easily run 33's|
|02-29-2012 08:16 PM|
If you go with a 4" lift, you are opening up another can of worm. You will need to do a sye, cv driveshaft, rear upper CA's and all this can get pretty expensive.
The ideal tire size for a 4" lift is 33" tires.
|02-29-2012 07:09 PM|
if you just want to run 33s and have the Jeep "look" I'd suggest a 2.5" suspension lift and 1.25" body lift. I know you said you didn't want a BL but realistically lifting the Jeep 4" could potentially cost you a lot of money in the long run just trying to achieve the look. Another (more costly) option is to buy a high line or tube fenders. Then you could run larger tires with no lift at all.
For what you're saying you want to do a 2.5" lift and 32s will likely get you very close to what you want.
|02-29-2012 07:00 PM|
|cadenas||By the way the kit runs $500 from baseline|
|02-29-2012 06:58 PM|
|cadenas||I might be Wrong but my understanding is that if you go over 3 inches on a suspension lift you will have to do much more besides that lift kit. There's a zone 4.25 that has a 3 inch suspension and 1.25 body lift. You wouldn't have to buy anything else. No tummy tuck or anything. This is what I'm about to order and heard good things about it, if its your DD stay with the regular shock not the nitrogen shocks they will ride rougher. Hope this helps and doesn't confuse you|
|02-29-2012 06:48 PM|
|da5speed||Im in the same boat. Not much off roading around me just the beach. But i wanted a lifted Wrangler. Started with a Rough County 4 inch lift $500. Looks great but Rocks around like a boat. Had vibrations so ended up doing a Slip yoke Eliminator kit with a CV drive shaft $400. All instillation work done by me. I know i really should do adjustable lower control arms at some point. Still have the stock rims with 31x10.5's they do rub a little in tight u turns. Just got a set off 33x12.5 retail around $800 and crager soft 8 from jegs for $315 shipped with center caps. Ill tell you i didnt do the SYE and CV till 5 months after the lift and i was pissed when i did the lift cause i didnt do my research.|
|02-29-2012 05:55 PM|
Need Help Building My TJ
Okay, I'm clueless.
I own a 98 Jeep Wrangler.The only time it goes off roading is through the cornfield or across the yard, nothing extreme. So, I'm trying to make it look good for the summer. I want to put a lift kit on it. (not a body lift). I was hoping to go 4 inches, if I can without going through all the extra work. I also wanted to get some new wheels and tires... I've been looking at cragar soft 8 rims.
So my questions are..
What brand/kind of lift kit do you recommend? (not killing me on budget, but not cheap stuff)
What tire size and rim size do you think would look best with the lift?
I'm extremely clueless where to start, but I got some money and it's going be a great summer. Thanks for the help.