|03-07-2012 06:36 PM|
|BigDjeep||Will they withstand the added weight of the 35's|
|03-07-2012 06:21 PM|
|ESP||Your stock shafts will be fine with a 2.5 kit.|
|03-07-2012 06:17 PM|
|BigDjeep||I was looking at the AEV dual sport XT 2.5 kit and adding on the AEV geometry correction front control arm drop brackets and running 35's. If I do this set up will I need to get some different driveshafts or will the stock ones work?|
|03-07-2012 05:42 PM|
|03-07-2012 05:33 PM|
|BigDjeep||I am looking to spend around $1,300-$1,500 for the kit. I will be upgrading the front and rear bumpers|
|03-07-2012 11:59 AM|
|03-07-2012 11:53 AM|
"Let's get Mikey!"
"He won't install it, he hates everything..."
|03-07-2012 11:45 AM|
|03-07-2012 07:19 AM|
Also, you'll need to get your Jeep regeared.
And if you go over a 3" lift you'll need at least a new front axle.
|03-07-2012 07:14 AM|
|4fit||Welcome to the forum. Both of the posters above provided you with some good info. Look into something like a 2.5" Teraflex coil lift, Rock Krawler stock mod, Full Traction econolift, etc. If you don't plan on adding a bunch of weight via bumpers, armor, winch, etc, you could even go with a 2.5" budget boost. However, it won't ride as well onroad or flex as well offroad as a coil kit.|
|03-07-2012 07:10 AM|
|daggo66||Welcome to WF. I would suggest you start by reading this: http://www.wranglerforum.com/f33/jk-...ews-25157.html It should provide you with a lot of ideas.|
|03-07-2012 07:08 AM|
2.5 will work. How much loot you willing to drop?
|03-07-2012 12:00 AM|
2009 JK-X life kit
Have a 2009 JK 2 door and I am looking of a bad to the bone kit that will clear 35/12.50/16. Any help would be nice