|05-02-2014 09:47 AM|
|05-02-2014 08:52 AM|
I'm not questioning your math, I just want to know for future reference.
|05-02-2014 07:58 AM|
I know this is old, but do you have pictures of this with 265/75 sitting on a flat surface.
|03-08-2012 06:16 AM|
Yep, my photo above is with full flex infront with sway bar disconnected.
|03-08-2012 02:57 AM|
|XJ Knight||265/75/16's comes out to being around a 32in tire so with the 2-2.5in lift you'll be good to go even if you disconect|
|03-08-2012 02:27 AM|
They'll fit but without a lift you'll get some rubbing offroad.
I run 265/75/16 on my Sahara with 2" BB and I can get full flex without any rubbing. I have 2" bumpstops extensions in the front and 2" longer sway bar liks at the rear.
|03-07-2012 08:29 PM|
|03-07-2012 07:51 PM|
|dezertdirt||I have that size tire on a stock 05 LJ and have had no issues, albeit I haven't wheeled very hard and its in the low desert|
|03-07-2012 07:09 PM|
|Jonny15||2 or 2.5 inch spacer or coil lift will fit 265's with no problems.|
|03-07-2012 06:51 PM|
Quick question here mates before I run into any kind of trouble.
What kind of lift do I need to run a 265/75r16 Tyre on my 2004 Rubicon. Is a 2inch lift kit enough? when I say lift kit I mean 4 2inch coils and proper shocks to match. I plan on running the stock moab wheels.
Mind you I am not talking about a mall crawler here, I hit the trails with my mates 2 or 3 times a week, so I am looking for something completely functional here.
Any input, or hopefully a pic or two, will be greatly appreciated.