|06-15-2012 07:38 PM|
|XJ Knight||You should be OK.. But I think it would be close.. The stock wheels are 7.5in wide with 6.25 or 6.5 inches of back space. Bump for another opinion on this|
|06-15-2012 02:39 PM|
|travis29||5" backspace with 0mm offseT|
|06-15-2012 02:06 PM|
|06-15-2012 02:02 PM|
|travis29||Thanks, Jk. but now im conufsed with the backspacing portion. How would I know.|
|06-15-2012 12:59 PM|
Edit: Just realized your talking about a after market 18x9 and not the stock 18x7.5. My bad.. With proper back spacing what ever 18x9 your looking at will be fine
|06-15-2012 12:49 PM|
|travis29||18x 9 wheel, 285/65/18 on a 2012 JKU./ I've been told yes they will fit fine, others say some rubbing. 99% driving in the city.|
|06-15-2012 11:13 AM|
Just to confirm, you only had rubbing on the air dam?
Did you do the leveling kit to fix the factory rake, or was that to prevent other rubbing?
|05-11-2012 11:00 PM|
Cut the airdam - Zero rubbing now.
|05-11-2012 05:05 PM|
I started this thread with the 265 question, so I understand that.
I expect the rubbing to be eliminated when the airdam trim is done - I'll let you know
|05-11-2012 04:06 PM|
|pluke the 2||
K M 2 ' S J U S T S A Y I n G
|05-11-2012 03:58 PM|
True, but my main reason for any change would be to upgrade to the almost universally loved Goodyear DuraTrac.
Plus the fact still remains that I'll have rubbing issues with the 285s. My decision is based on more than the weight and for me there are simply too many trade-offs to move to the 285s.
In fact, if there were a better selection of tires in the 255/75, I might not even switch at all. But the only tire I like is the Firestone Destination A/T. I like the DuraTrac better.
|05-11-2012 03:50 PM|
|05-11-2012 03:46 PM|
Rubbing is one of the negatives for me. The other is the weight and cost of these tires relative to moving to 265s instead, which is where it looks like I'm headed. I don't want/need bigger tires, nor do I want the hassle (to me anyway) of dealing with a lift and/or spacers; I simply want a better tire. The 265/70R17 DuraTrac seems to fit ().
So, while the 265s are not the normal route when one upgrades tires for a Jeep, I think it's my best all around solution for what we need. Sure, I lose the beefier look the 285s give you (which is nice), but I don't take quite the performance hit as the 285s spec at 9 lbs. more per than the 265s, which are already 7 lbs. more than the stock SRAs. Plus, I save a little money as well.
At the end of the day, I've found that the 265/70R17 DuraTrac will be about 0.0352 inches (slightly more than 1/32 of an inch) smaller; In my mind, the same size.
Thanks a lot to jsb432 and flyinion from this thread for posting their Jeeps on stock wheels and suspension. Also thanks to irideducs for this thread which got me started looking down the 265 path.
|05-11-2012 02:43 PM|
|MacCTD||Looks good, do you notice any difference in the ride where they are LT tires?|
|05-11-2012 12:28 PM|
As of now, they do rub - but only at the extreme right or left.
I would say if you are careful - spacers may not be required for daily driving.
Right now I'm getting the TeraFlex leveling kit installed - we will see if this holds true after the kit.
|05-11-2012 11:44 AM|
|mgola27||Looks good. Congrats.|
|05-11-2012 11:24 AM|
Pulled the trigger on tires - 285/70 GY DTs:
NO Spacers at this time - bone stock on suspension:
|05-04-2012 09:05 AM|
Yes - and before joining this forum that was my first thought. The data provided in this forum provided data to consider other options, including an increase in size with spacers.
I've decided to stay with the stock wheels, because the only other wheel I like is the AEV pintler, and adding five of those to the price of 17" tires is a little out of scope right now. (for that money, I could have the LOD rear bumper I want...)
I'm setting up a bolt change and level kit, waffling on the warn elite front bumper and a winch.
For tires, it will probably be the 275/70/17 BFG AT KO or the 255/75/17 GY MT/R. any 285 adds another $50/wheel in spacers.
I want to have my tires in place so everything in together for an alignment when the level kit and bolt job is done.
But then, Jervboy shows nice pics of 285/70 on stock wheels which look like they fit under the flares well in this thread:
The profile reads spacers, but I thin maybe the pic was after the tires, but before the spacers. He also has the leveling kit, and the proper color...so naturally I use his ride as an example.
|05-03-2012 01:19 PM|
It specs out at 1-inch wider and just a tick over the stock size (32.1" vs. 32.1"). I'm not sure about rubbing clearance, but since many have run the 285s with minor rubbing, it's possible we could run this tire on stock wheels without issue.
They are an E-rated tire... not entirely sure what all that means, except that I guess they can handle higher loads, so that may mean they will ride harsh (?).
Has anyone run these on stock wheels? I didn't see them come up in my searches.
Since you love the KOs, this might be right up your alley. I like the looks of them, and they are certainly popular on all types of 4WD vehicles, so it would seem they would fit the bill nicely.
|04-18-2012 11:11 AM|
Great info rics1997 - excellent pics really give me allot of the info I was looking for.
If I go to 285/70, I have the option to go with DT, but I do like the MT/R look.
How is the road noise on the MT/Rs? (note - I'm running the stock SRA right now, so any noise will probably be an increase)
Noise is important to me as this will be a daily driver - so I'd still like to be able to carry on a phone conversation via uconnect at highway speed without a hum in the call.
|04-16-2012 11:47 PM|
Wonder if steering stop washers only would have been enough to avoid contact instead of wheel spacers?
|04-16-2012 11:12 PM|
Were they rubbed before adding spacers
|04-16-2012 11:10 PM|
Here is mine when I had my Goodyear MT/R's 285/70/17's on. First 2 pics is just stock with no wheel spacers. they slightly rubbed the sway bar at full turn so I eventually added 1.5" wheel spacers to correct.
Stock w/o spacers
Stock wheels with 1.5" spacers
|04-16-2012 11:03 PM|
|04-16-2012 11:02 PM|
|pluke the 2||
you can rub with pizza cutter 16's and stock sra steet tires.
|04-16-2012 10:57 PM|
|04-16-2012 09:42 PM|
|pluke the 2||
|04-16-2012 09:39 PM|
I really like those wheels can you provide any info?
|03-12-2012 10:07 PM|
|jsmithtx||Northridge 4x4 does. It's their top seller. Spidertrax.|
|03-12-2012 09:09 PM|
I put the stock size Silent Armors on about 200 miles after I got the '12. We haven't had much snow, but these should beat the SRA's for snow and ice, are good on gravel, and don't seem to throw small rocks like some tires. Nice ride I think. Yeah, they don't look real aggressive but that's okay with me. An AT tire generally seems to do what I need just fine for me. These only weigh about 8 pounds more than the SRA's and mileage has been 16.5 to 17 MPG in city/suburban type driving. Just got my $100 tread lightly rebate check for this set of tires, so that was a plus.
|This thread has more than 30 replies. Click here to review the whole thread.|