|06-16-2013 04:38 AM|
Quadratec Q9000 Self Recovery Winch
Well its 2013 , don't see any new post on what you all think of your Quadratec Q9000 Self Recovery Winch , Got mine on the jeep with the Smittybilt MOD Bumper looks great . Sorry have not used the winch yet.
|02-24-2013 01:15 PM|
|loufoto||First add-on to my 10A Rubicon after a very long wait will be a Quadratech Q11000 in black|
|11-30-2012 09:45 AM|
|ElectricJay||Good looking Jeep. Thank for posting pic of your winch.|
|11-30-2012 09:39 AM|
They still offering it for $300 w/ free shipping?
How was the install? does it just run straight to the batter and that's it? did you get any front end sag from the weight?
|11-30-2012 09:34 AM|
I like to looks of the "i" series models better with the fixed solenoid and also the black color.
I'd buy this again in a heartbeat as for the price it can't be beat with the lifetime mechanical warranty.
Here is a crappy cell phone picture.
|11-30-2012 09:08 AM|
|ShoreWrangler||Any more updates on the quadratec winches from folks that have them? I'm pulling my cash together in hopes of buying one after Christmas. How have they been holding up so far. Since they finally came out in black I can get one, the green just didn't do it for me|
|10-24-2012 10:20 PM|
I placed an order and received my winch this week. Thanks to Joe for his assistance in getting my order shipped for free for a forum member. I unboxed the winch and found that the hardware to mount the Roller Fairlead and the Winch was missing. I called Quadratec and they were very helpful. They shipped the order same day. My issue is that they shipped the missing hardware via UPS ground, not overnight. I don't have time during the week to spend installing the winch, so it will now have to wait until the next weekend.
I understand that things go missing on occasion. I understand that factories miss hardware packets when they are packing the winch. That happens, but to take the cheap way out of shipping the missing hardware is inexcusable.
That said, the winch looks top notch. Everything so far looks fantastic. I'm really happy with my purchase other than crappy shipping for replacement bolts. I will end up going out and picking up my own hardware and forgetting the factory hardware, but this is the kind of simple things that drive people nuts and make the difference between plain customer service and great customer service. They skimped out on $$$ for shipping and have potentially lost a continued customer.
|09-17-2012 05:59 PM|
This past Friday I received my Quadratec Q9000 winch and Drake Billet inserts from Quadratec (Thanks Joe!!) and spent the day installing.
First of all, I chose the quadratec brand winch over other winches mostly because my use is pretty limited. I am able to make it out the off road park about once a month or 2 and being that I am in Texas, most days are pretty dry, so I won't be pulling my selves out of a mud pit as often as others. Other entry level winches in the same price range just don't seem to match up spec for spec, and though I haven't seen a ton of rave reviews for the Q-tec winch, I haven't seen much negative yet.
All of the product showed up on time and good condition. I was quite happy with overall appearance/quality of the winch. It is very heavy and seems to be made with solid components.
I decided on the Drake billet inserts for the grille based on lots of research, and deciding that spending almost $200 for other options that weren't the cheap "home depot" mesh grille insert, i felt this was the best bang for my buck.
Thanks to the wranglerforum.com i was able to get advice on removal of the front grill, which only took minutes.
I have a Smittybilt XRC front bumper so there was already a spot set up for the winch. For the most part, the winch was pretty easy to install. The 2 main issues i had, were 1) access to the mounting bolts, and 2) the length of the battery leads from the winch.
I was able to get all 4 bolts in and tightened down, however there is such a small amount of room for you to get a normal wrench in, I am going to have to take it to a shop that has a long enough extention for a socket, as well as something that gives a bit of an angle, to get them torqued all the way down.
The battery leads don't leave much room to play with. They mention this in the instructions, but I just don't see why a few extra inches wouldn't hurt so that you could keep all the lines tucked up again the body all the way to the battery.
I actually had much more difficulty with the Drake inserts. Once in, THEY LOOK GREAT!, however the low quality on the hardware means its REALLY REALLY easy to strip out the allen heads...
This meant i spent much of my time trying to vice grip the other side of the bolt to try and tighten them down. This also meant I managed a little bit of damage and had to re paint (spray paint) in a few spots... luckily i chose black which made it easy to cover up...
My plan is test the winch out on the trails later this month, at which point I will return with an update.
All in all, I was very happy with the winch. Operation is smooth and appearance is top class!
P.S. Yes i know I bought a smittybilt winch cover... but there isn't a q-tec brand avail yet, and I managed to buy this one off a fellow jeep buddy for 10 bucks... serves its purpose.
|06-20-2012 11:29 AM|
|sprtplt11||But, Warn winches are American made, right?|
|06-20-2012 10:25 AM|
Check out our trail video of the Quadratec Q9000 Winch
|06-18-2012 08:25 PM|
|brtabo||X3 I'm looking at buying soon. Is there any word on a black one instead of grey? If not it will be another bedliner job|
|06-18-2012 03:52 PM|
|pkmcd99||Lets get the personal testing results in peeps : D|
|06-18-2012 03:33 PM|
|06-18-2012 03:33 PM|
|06-18-2012 01:03 PM|
|06-18-2012 12:41 PM|
|Cac||Any updates on how good Quadratec winch are working|
|03-27-2012 02:57 PM|
|dadrunamok||UPS dropped mine off 30 minutes ago. I need to get done with this work stuff so that I can start in on it.|
|03-27-2012 10:53 AM|
|03-27-2012 08:59 AM|
|03-27-2012 07:41 AM|
I'm excited to hear more reviews!!
|03-26-2012 02:59 PM|
|glap1922||Dang I would have been much more likely to buy one had I known there would be a discount/giftcard/blemish! Oh well, congrats on the deal, let us know how they work in real life situations if necessary!|
|03-26-2012 02:50 PM|
|03-25-2012 07:46 PM|
|nmdriver||I just installed mine yesterday on my factory bumper with bracket. Looks really good. Haven't tried out yet...I need to get stuck this week!|
|03-25-2012 07:24 PM|
My Q9000 arrived last week. I received a price discount ($269) and will be getting a $25 gift card because the batch Quadratec received had "blemishes" due to shipping. I barely notice any on mine.
Mounted it to my Smittybilt XRC MOD bumper - middle section only (sides and bull bar still on back order) - and installed them both today on to my 2012 JK 2 door.
We started around 1:30pm - finished install around 7:30. This included trips to hardware store for tools I needed. We took our time and are rookies at working on Jeeps (me and my brother).
Biggest obstacle was that the winch was too long to clear the frame mount for the bumper on the passenger side. Had to use a saws all and cut about a half inch chunk off that mounting plate section, at the corner, for the bumper to mount with the winch on it.
Other minor issue is that Smittybilt included a vacuum canister relocation kit for 2012 JK's. Funny thing - noticed after I removed the canister and cut the bracket - that it didn't appear to really need to be moved at all!!! Also - even if I did need to do the relocation - I would've needed to do it BEFORE I mounted the winch, as the relocation bracket provided goes between the winch and bumper mount...so we just rigged our own bracket instead.
All holes lined up otherwise for both winch and bumper. Also - I did a top mount for the solenoid as I intend to install a bull bar.
Tested it out by pulling my JK up my drive - success
Will post more info / pics after I get rear bumper, tire carrier, and the ends/bull bar (when those two parts arrive...) - and after I've beaten things up a bit
|03-13-2012 01:06 PM|
|03-13-2012 12:02 PM|
|stevebanzai||I'll stick around for when they go synthetic. and black. That color sucks.|
|03-13-2012 08:25 AM|
|Matador||Just make sure to test everything as soon as you get it. They had a bunch damaged during shipping from China.|
|03-13-2012 08:03 AM|
I believe I order in Jan and I got the 11000
|03-13-2012 06:53 AM|
|03-12-2012 02:52 PM|
|chadzter||Just got a email that mine shouldbe here tomorrow afternoon.|
|This thread has more than 30 replies. Click here to review the whole thread.|