|03-18-2012 11:57 PM|
|Fishnhuntforever||The hardware store|
|03-18-2012 08:28 PM|
|hellkatshockey||Is there anywhere I can get replacement nuts for those bolts|
|03-18-2012 08:08 PM|
|y0diggity||I've left the nuts off of mine for the summer time. I'll put them back on in Fall. Mine will be off most of the summer but I'll put them on when we get the week-long rains. I figure that they probably won't bounce off... Hopefully.|
|03-18-2012 08:05 PM|
|hellkatshockey||Yep they must of had them off. I know if my grandparents still owned a jeep they would take them off lol well on a good note mine just took some PB blaster and some brute strength. Had a jack But it didn't even reach the bottom. Defiantly needed the second guy to help lift and will grease them b4 I put them back on|
|03-18-2012 07:24 PM|
I guess the elderly people had your doors off, with the missing nut on the bottom of the door pin!
I had to lift and swing for about 3 minutes per side the first time I took mine off.
|03-18-2012 04:57 PM|
Mine were in the same shape as yours, I just kept swinging the door while lifting it and it came right off after a minute, same with the other door. If there full doors make sure your ready for 50-60lbs I would say. Kinda of a surprise I did not think they weighed that much haha, not that it was heavy it was just a moment of "wow I have to use my muscles for this wtf... " lol
|03-18-2012 04:42 PM|
|hellkatshockey||Thank you very much guys I've got the pb blaster soaking on it right now I'm gunna try to lift them off if I can't get them I've got a buddy coming over tonight and I'll go straight to the jack technique. Thanks for the helping hands to us newbs|
|03-18-2012 03:34 PM|
|The_Jode||If you are close to an auto store, run and pick up a can of PB Blaster. Spray on the hinges, let sit for about 5 minutes, open and close the door a couple times, and then they should just lift right off. Looks like you have a nice rust layer binding you up.|
|03-18-2012 03:28 PM|
You are ready. The first time taking the doors off can be a PITA. Open and close while you are pulling up. A second person might help the first time.
I smear a little grease on the pins everytime I put them back on. They just lift off easy as pie after the first time years ago. In fact, I just took them off yesterday.
|03-18-2012 03:03 PM|
They should just lift off, but based on how your hinges look it may take a little more than that. If you can't lift them off, try putting a broom handle or something like that under the door and over the door sill, and using it as a lever.
You could also probably try wacking those threads sticking out to try to break them loose and then try lifting it off.
|03-18-2012 02:47 PM|
|Michigunman||Yep, the nuts are gone. They go on the threads sticking out the bottom of the hinge. Swing door while pulling up.|
|03-18-2012 02:39 PM|
Am I ready/able to take my doors off
So my question is are my doors ready to be lifted off? I've read about how there is a bolt you have to remove from each hinge but I thing mine might already be off. The original owners were elderly so I don't imagine them taking the doors off but who knows? Hope these pictures will help and thanks for the input
All 4 of the hinges look the same. Except maybe not as much rust lol