|03-24-2012 11:18 PM|
Can anyone give me any info about this th350?? Im thinking its the newer model.. Is that the desirable model?
|03-23-2012 05:59 PM|
Just put on the headmans and some new wires and plugs. I have to Get something to get the wires all cleaned up and away from the exhaust.
|03-20-2012 12:40 AM|
Well I ordered these headers.. Maybe they'll boost it a bit?
Hedman Hedders 69640 - Hedman Street Hedders - Suggested Parts - SummitRacing.com
I think you actually suggested them to me.. Im going to run new exhast pipe all the way back. Maybe 2 1/2 or 3?
|03-20-2012 12:34 AM|
Less HP but a lot more torque. Plus if all this info is right you have a 4 bolt main, which is a stong engine to build.
Im not sure that HP stated is correct either. One site said 185hp.
|03-20-2012 12:23 AM|
|yjJEEPyj||I must of gotten it wrong. So 165 HP?? I'm going to have to do something about that.. Was hoping to just throw it in.. but i think i need some more power then 165HP|
|03-20-2012 12:20 AM|
|Master4th||I cant seem to find that second number metioned.|
|03-20-2012 12:02 AM|
165 HP? lol thats less then my 4.0!
That kinda sucks!
|03-19-2012 11:56 PM|
Ok so you have:
V= Flint Built December 3rd, 1981
UHX 1981 350 165 4 con cab, a/t, A.I.R.
UHX = 1981 350 with 165 HP and a 4 bolt main,
Con Cap [not sure what that is]
Automatic trans, with air conditioning.
|03-19-2012 11:54 PM|
there was this number under the engine code... it went....
V1203UHX...... Then under that it was kinda faded but i think it was..
|03-19-2012 11:50 PM|
|Master4th||On the back of the engine there could be a partial vin. near where the bellhousing hooks.|
|03-19-2012 11:41 PM|
|yjJEEPyj||ok if im reading it right.. It's V1203UHX|
|03-19-2012 11:37 PM|
|Master4th||Damn it is on the passenger side head.|
|03-19-2012 11:32 PM|
Ive been looking using this link...
Chevy Engine Codes
would that require taking it apart to see the code?
|03-19-2012 11:27 PM|
|Master4th||Get that head casting number if you found it.|
|03-19-2012 11:19 PM|
|yjJEEPyj||It would be on the block not the heads correct?|
|03-19-2012 10:52 PM|
|Master4th||Somewhere on the passenger side if I remember correctly.|
|03-19-2012 10:51 PM|
|yjJEEPyj||Where is the second code|
|03-19-2012 10:46 PM|
|yjJEEPyj||i'll go find all the codes i can see|
|03-19-2012 10:15 PM|
14010207 = 1980 to 85 350 HP-190 & up Could be a 2 or 4 bolt main. Corvette engine.
Another site had this
350 80-85 155-255 car & Truck 2 & 4-Bolt Passenger stick
|03-19-2012 10:12 PM|
|03-19-2012 09:43 PM|
|yjJEEPyj||MY casting number is #14010207|
|03-17-2012 10:50 PM|
|yjJEEPyj||Ok so basically I don't need it.. Thanks!|
|03-17-2012 10:46 PM|
Remove it, its such an outdated item, and has a high a failure rate.
|03-17-2012 09:40 PM|
what is this do hickey?? is it needed? Just trying to clean up my engine and relocate wires.
|03-17-2012 10:21 AM|
|yjJEEPyj||Thanks for the info. You rock man!|
|03-17-2012 09:30 AM|
Also make sure your getting a 4x4 tranny or the tailhousing will be wrong.
|03-17-2012 09:07 AM|
|yjJEEPyj||I would love to go TBI but it's out of my price range for now. So Im just going to roll with the carb till I get some more cash.|
|03-17-2012 02:03 AM|
Early 80s Chevy engines weren't the best, your better off usign that block and converting it to TBI, TBI is simple, and WAY more reliable then any carburetor.
You will need to remove ALL your Jeep computer stuff, Sorry, but they are not compatible.
|03-17-2012 01:20 AM|
now Im looking for a th 350. Do i have to get it within a certain year of my engine? Heres a few I found close to my area. Let me know what you would do.
350 turbo transmission REBUILT with shift kit - $400 This is a 350 turbo transmission that is a short shaft transmission with a shift kit installed and it has the heavy duty steel clutches. This transmission fits the 1987 or earlier cars or trucks that are non electronic, and it does not have overdrive. this will work in cars or trucks. We can install this transmission for you for an extra cost. 400.00 cash.
Chevy 350 Turbo Tranny Bolt Up And Go - $175
Good Tranny Pulled from 83 silverado...about 10,000 mi. on rebuld (tc. too). wrecked the front end scrapped truck and sold motor. Tranny still good. O.B.O
|03-15-2012 12:40 AM|
|yjJEEPyj||Ok sounds good. Maybe ill just get her all cleaned and slap those headers on. I just cant make up my mind!!|
|This thread has more than 30 replies. Click here to review the whole thread.|