|03-28-2012 01:18 AM|
|whiteyj||Spring streatchers? Running 2-1/2 and can still rub my 31's.....|
|03-28-2012 01:13 AM|
Wow, this thread is still going?
|03-27-2012 01:12 PM|
|DirtyRob||If your springs have any upward arch then it has a lift. you probably have 4-6"of lift or may be combined with a body lift. if you don't know what you are looking at you will not just "see" a lift. the jeep looks good either way|
|03-26-2012 10:00 PM|
|jfbilbro||35's and no lift??.....SHENANIGANS!!!!!!!!!!!!!I got a 91 Rendgade and it WON'T work....period...|
|03-26-2012 09:35 PM|
There might not be a suspension lift, but it may have a body lift. Looks too high to be stock. Take a pic of your body mounts and post that too. There MUST be some sort of lift.
|03-26-2012 06:21 PM|
|deepak||guys i just purchased this jeep and i thought i had two inch lift lit but when i lifted it up at my shop to remove the tranny i didn't find anything.. and i can take picture of the suspension to prove that it doesn't has a lift..|
|03-25-2012 01:33 AM|
|Fishnhuntforever||Ooops I meant to add 4.88 gears for 35's to get back to factory specs,|
|03-25-2012 01:32 AM|
|Fishnhuntforever||I have 35's with a 4" Rc spring lift and 1" shackle lift and I still rub when the suspension is articulated....... Hmmmmm.... you mustr have metal cloak fenders or cut the fenders and hood and did some fab work.|
|03-25-2012 01:09 AM|
|Kc7cgf||I have 35's with 5in lift still had to cut fenders and use tj flares to make them fit but as far as gears I have 4.88:1 in mine and like them a lot it is low for freeway driving though if that's what u are going to do|
|03-23-2012 04:19 PM|
Everyone this guy is very bright and I say this cause in the above statement he/she says that he has "no lift".. Well in his jeep profile he lists that he has a 2in lift.. So OP explain yourself
This is the pic of his jeep in his Jeep profile
|03-23-2012 04:06 PM|
35's with no lift is easy...
|03-23-2012 12:58 AM|
|Dutch 95||Ummmm....am I the troll? I think I'm on thin ice as it is.|
|03-23-2012 12:53 AM|
|Nubby55||I'm gonna call B.S. on the "48 with no lift,LOL.|
|03-23-2012 12:48 AM|
I smell a Troll...
I fit 44's on my old '48 CJ2A with no lift too!
|03-23-2012 12:46 AM|
|Dutch 95||LOL..........beat me to that one Xpress. I agree.......got pics?|
|03-23-2012 12:45 AM|
Pictures now, because there's no way you're fitting 35's on a stock Jeep with no lift.
Also you didn't mention what engine you have.
|03-22-2012 11:55 PM|
|03-22-2012 02:16 AM|
|deepak||and the jeep still has the orginal fenders.. i didn't trim them at all|
|03-22-2012 02:14 AM|
|deepak||no i have renigade kit install trust me no lift at all,, they fit perfectly fine and they don't rub.. ill post a picutre.|
|03-21-2012 10:12 PM|
|Master4th||He either has a lift and don't know it, or he cut the fender wells out. I had 31s and rubbed.|
|03-21-2012 09:12 PM|
You need to buy new ring and pinion gears, and depending on what you have now, maybe a new carrier. Thsi goes for the front and rear. A master install kit (new seals and bearings) would be a good idea while you are in there too.
I am still trying to figure out how you got 35's on your YJ with no lift.
|03-21-2012 04:25 PM|
|deepak||i don't go offroading that much.. i just love my yj and use it cruze around town..|
|03-21-2012 04:22 PM|
Re gearing my yj wrangler
i own 92 yj with 35 inch mickey thompsons and no lift.. the performace is really poor because it still has stock gear ration. so i need help/ instructions and what to buy and what do i have to replace in order to change gear ratio.