|03-22-2012 09:44 AM|
|twalton||Just changed out springs on my JK. Used a 4 ton jack(21 in. lift) and 6 ton jackstands, all from harbor freight. perfect.|
|03-22-2012 09:38 AM|
|3TimeOwner||3 ton on a 2x6 or 4x4 jack stands on the frame right behind the lca bracket|
|03-22-2012 08:17 AM|
|ovrthetop||I use 3 Tons on the frame witha 4x4 on top gets it plenty high|
|03-22-2012 07:51 AM|
|03-21-2012 06:22 PM|
Chances are the 3 ton jack stands won't lift you high enough. My advice would be to get the 6 tons from harbor freight. You can find a coupon in one of the Jeep magazines for $30 for a pair. Make sure you get a floor jack that will lift high enough. I can't remember how high you need. It's ok to jack on the pumpkins. Your jack needs to get pretty high to get the front passenger tire off the ground when you jack on the pumpkin.
The jack stands can go under the frame. I had it up on 4 jack stands when I did my brakes.
|03-21-2012 05:59 PM|
lift points for stands
I am planning on doing my own tire rotation for now on. Two differant places screwed up lugs.
I am in the process of getting a floor jack and stands. Jimbox lowes does not have the jack anymore as far as I can tell.
I will soon have 285/70 17 tires. what lift range will work. 16" 20"?
Can you lift from the diff s front an back? Able to put both jacks under at one time?
Also getting close to brake pad change. So putting up on 4 jacks.
Looking at 3 ton jack and stands. Just not sure on lift hight.