Rugged Ridge, Mopar, and Olympic all make one similar to Mike's (which I believe is the Rugged Ridge model). Then there is the MBRP bar like kjeeper is running,
On edit: posts move fast around here!
03-22-2012 02:30 PM
Originally Posted by Alpinejku
Where did you get it.
Here's my bumper explanation from another thread. Let me know if any of the links don't work for you.
Originally Posted by MTH
I get quite a few questions about this set up. It's this Rugged Ridge light bar. I cut the light brackets off with a sawzall and used an angle grinder to smooth out the cuts. Then I bedlined over the exposed metal with spray-on Rustoleum bedliner. Install wasn't bad, though your fingers need to get to some narrow spots.
I will say that the steel on the light brackets is no joke. I mounted the light bar first and then used a sawzall, and the sawing definitely worked the mounting hardward pretty hard (though it's still rock solid). If I had it to do again, I'd consider cutting the tabs before mounting if you've got a bench mounted vice.