|04-02-2012 08:04 AM|
|erickpl||OTRATTW is a GREAT site. Trust them! Many here get there switches there, including me.|
|03-30-2012 07:39 PM|
|SULFEK||Im still in Afghanistan, I dont come home for another 27 days. But when I get there you will have more pics than you need im sure. here is my build that I started from here about the backgound of my last TJ. I will be starting my first full build when I return, Axels, coilovers, lockers, etc etc. Here is the link, see you there. http://www.wranglerforum.com/f5/comp...ra-146620.html|
|03-30-2012 05:07 PM|
They also sale a vent switch pod but it doesnt work with some of there switches :/ Vent switch pod---> OTRATTW
|03-30-2012 04:03 PM|
|99georgiatj||here is my before and after with my OTRATTW laser etched switches, I made the switch panel myself.|
|03-30-2012 02:50 PM|
Don't be jealous
|03-30-2012 02:35 PM|
|03-30-2012 02:29 PM|
|SULFEK||I'm not so sure that's all there is to it. The OEM Factory look to me is worth 150.00 easy. I hate the look of a bunch of toggle switches all across your main display. I think the sleek streamlined look is worth the extra bucks. I run a pretty high profile electrical system with a custom dual optima set up linked with a blue seas automatic relay all wired in with a static post and with a custom built alternator to charge it all. I have 24V off road lamps, on board air, cb radio, hid display headlamps, Bazooka tube, auto start, a winch and some 1.5 amp chargers. I use all of the switches, and the air gauge for my onboard air system. I think it is more than worth the money. To top it all off I got a huge discount for being in the Army.|
|03-29-2012 12:39 PM|
|03-29-2012 10:42 AM|
|Once Far Off||
|03-29-2012 10:15 AM|
I guess I don't have a pic of it installed, but I run this in one of the factory holes.
Same as the Daystar switches, but with custom icons.
|03-29-2012 09:44 AM|
|03-29-2012 08:38 AM|
|03-29-2012 08:20 AM|
|SurfKaster||Don't act like you're not impressed.|
|03-29-2012 07:58 AM|
I don't have any pictures right now, but I have 8 switches where the ash tray would go. 1 master switch for all my lights, 5 individual switches for each set of lights, a switch for a set of strobe lights, and a 3 way switch for my radio so it will work with the ignition or directly off battery power.
I have one hot line coming in that splits to three switches and my cigarette lighter (i like not having to have the jeep on to charge stuff): the master, the strobes, and the always on radio (3 way switch can be one in and two outs or two in and one out...). The out on the master switch goes to the in on my 5 light switches. they are just chained together (so when all my lights are on I only have to hit one switch to turn them off instead of 5). Then the outs on each switch run to their respective relays. The second in for the 3 way switch for the radio is the original power wire. I cut the power wire and spliced the vehicle side into a short piece of wire to go down to the switch and a second wire comes back up and connects to the radio side of the power wire. I now have a choice of two power sources for the radio.
|03-29-2012 07:31 AM|
you would have to have an Irish accent and be called O'Malley. So then when the Pilot said "energize the OBA , and start number 2 locker" you can answer in a cool, calm voice " Ay captain, activating noomber une looker"
|03-29-2012 03:30 AM|
Can I be your co-pilot sometime and you can bark random nonsensical orders at me like "energize the port side electro differential synchronizers!!" And then i'll look at the switches with a furrowed brow and concerned look, and carefully select the proper combination of toggles to manipulate. It would be a good ol' time I would probably make rocket noises on occasion while clicking them on and off, if thats ok with you.
|03-29-2012 02:51 AM|
|Jodfie||My switch set up... First too are ignition and accessory|
|03-29-2012 02:27 AM|
|netlohcs||That sPOD system is very slick looking. However, I wish they sold just the aluminum switch bezel for people that don't want or need all of the extra (an in my opinion, overpriced) other stuff. Even if they sold just the bezel and switches for 150 bucks, that means you are paying 300 dollars for a box with 6 relays and 6 fuses in it. Cha-ching! But at least they laid a couple of calipers on the table for you in the video (kind of corny imo) just so you get that warm fuzzy feeling and know all of their tolerances are ship-shape|
|03-28-2012 06:51 PM|
|03-28-2012 06:47 PM|
Is it worth the $450? If you are going to run auxiliary lights, lockers, OAB, or what ever - yes. Otherwise, you'll end up with what Kevbz describes above.
Here is the website.
4x4 SPOD Since 2005 - The ORIGINAL JEEP Over The Windshield Switch Console - Jeep Power Distribution System
Take a look at their video:
Here is picture of the source, inside my hood (over the battery). Everything is tucked up nice and neat within the aluminum housing ~ which is by the way designed to bolt directly onto the existing bolts on the Jeep.
|03-28-2012 06:17 PM|
Add OTRATTW's double lighted switches and you are now up to 25 wires!
|03-28-2012 06:10 PM|
|03-28-2012 04:26 PM|
|03-28-2012 04:05 PM|
Only 1 so far adding another this weekend
|03-28-2012 04:02 PM|
|03-28-2012 03:53 PM|
|03-28-2012 02:58 PM|
Thanks. here is what I ended up doing.
|03-24-2012 07:48 PM|
|Once Far Off|
|03-24-2012 01:51 PM|
|SULFEK||yeah I had to I have a VIAIR on board air system in my jeep.|
|03-24-2012 11:11 AM|
|Kevbz||my two switch set up, will change with when more switches are added. I can add one more up here but room is tight in there as it is|
|This thread has more than 30 replies. Click here to review the whole thread.|