|03-25-2012 02:47 AM|
|tjrhd||They are metric grade 8.8 I think. If they are like mine then they had a 2 inch threadless shank and I had to get new bolts. If your bolts were full thread then you could reuse them.|
|03-25-2012 12:09 AM|
When I took my lowering spacers out, I was able to re-use the same bolts.
But it will depend on how much thread the bolts have on them - luckily, mine were threaded (almost) all the way to the head.
I made the mistake of using a rattle gun on mine - think that caused some of the 'nutserts' in the chassis to spin.
|03-24-2012 11:21 PM|
T/c skid plate bolts?
My TJ came with a t/c lowering kit and I want to remove it to see if I can do without.Can I just get a shorter bolt or is there some special bolt I need?