|03-26-2012 10:21 AM|
|wvhillbilly||you lookin to buy a set? got a set for a good price if ya want them!|
|03-26-2012 08:34 AM|
|NHrubicon||You shouldn't have any problems-I ran 31x10.5x15 with nothing more than 2" budget boost for a couple years. Then I put in a 4" lift and went to the 33x12.5x15 and have had no problems. As long as you have bumpstops and don't really 'stuff' a tire you shouldn't be worried. When my flat fenders are installed my son is trimming back the edge of the tub so I can go up to 35" when my 33's go bare.|
|03-25-2012 12:08 PM|
Not meaning to hijack your thread, but I am planning on doing this myself.
I need new tires and want to run 33x12.5 tires. Right now I have 31x10.5
I do have a 2 1/2 lift and no tire clearance problems with the 31's right now.
Question is, after installing and trimming the wheel well out can I go ahead and
run the 33's until I get my bigger lift installed?
|03-25-2012 11:42 AM|
|NHrubicon||We had a YJ (94) rebuilt and modified a couple years ago-and I had Xenon flares for TJ mounted on the YJ with no problem. New holes needed of course but use stainless steel bolts and you'll never have a problem taking them off. Found out the hard way-son just removed the Xenons on my rubicon we had installed 5 years ago-and only bolts he didn't have to cut off were the stainless steel ones. Flat fenders he's building for me now will have all stainless steel bolts...|
|03-25-2012 11:34 AM|
|greenhead17||Thanks. I let him know and thats the route he is going.|
|03-23-2012 11:29 AM|
|Beachcruiser||Very popular mod. Have to drill a few new holes, but pretty straight forward. Allows you to trim a bit of fender for @ an extra inch or so of tire clearance.|
|03-23-2012 11:06 AM|
Tj flares on a yj
MY buddy was wondering if you could fit a set of tj flares on a yj. And is there anything we may not know about fitment