|03-28-2012 01:59 PM|
|billybobjoe||I am also nutless, my jeep came that way Although I am thinking of putting a plastic washer between my upper and lower hinge because the door opening and closing has peeled all the paint off the lower part of my hinge and it's starting to rust. Has anyone done this? The washer I mean.|
|03-28-2012 01:05 PM|
If you don't have a hard top, you're not deterring anything.
If you do have a hard top and lock the doors, you're good. Can't take the doors off unless they're open.
|03-28-2012 12:49 PM|
|Peepers||On my 98 when I used to put the nuts back on, I could sock them down until the door wouldn't swing anymore. probably just so you can't do that and some idiot would take it to the dealership saying the door doesn't swing anymore...|
|03-28-2012 12:41 PM|
I am also nutless .
I do throw some grease on the pins when I put the doors back on. makes it nice and easy to take the doors off the next time.
|03-28-2012 11:42 AM|
|03-27-2012 07:17 AM|
|03-27-2012 07:06 AM|
|robhurlburt||the only reason i keep the nuts on is to deter theifs form stealing my doors.|
|03-26-2012 09:16 PM|
Thanks for the responses though, I suppose it is not as big as a problem as I thought to have to doors on without the nuts.
|03-26-2012 08:15 PM|
|jetfan4lyf||My nuts snapped thread and all so it actually saved me some work.|
|03-26-2012 07:50 PM|
|03-26-2012 07:44 PM|
|Beaker541||Took mine off and I'm gonna cut the threaded part off so it's not hanging under the hinge.. They just look bad in my opinion|
|03-26-2012 07:30 PM|
|Once Far Off||Yep - I just left the nuts off.|
|03-26-2012 06:32 PM|
|Hammerdown||Someone should come up with a quick release fastener for people who want to feel doubly safe.|
|03-26-2012 06:22 PM|
|03-26-2012 06:20 PM|
I believe I have 3 nuts. Is that odd?
Haven't used them since I took the doors off about (30 minutes after leaving the stealership).
|03-26-2012 06:07 PM|
|Phobos||On both my 99 and my 08 I took them off threw them in the trash|
|03-26-2012 06:06 PM|
|03-26-2012 05:01 PM|
|Knowledge97||Lost my nuts back in 02, haven't been back on since.|
|03-26-2012 04:53 PM|
|LilYeller||ehh, I guess sarcasm doesnt translate well lol... yes I know they are talking about nuts and I was saying I dont use them either. wink|
|03-26-2012 04:46 PM|
|LiftedTj||Just leave them off. My TJ didnt come with the nuts. No nuts, all the glory!|
|03-26-2012 03:51 PM|
|Westbrook||No nuts for me either!|
|03-26-2012 03:36 PM|
|03-26-2012 03:19 PM|
|03-26-2012 03:18 PM|
|LilYeller||Theres supposed to be bolts on the bottom there?|
|03-26-2012 03:12 PM|
|03-26-2012 03:06 PM|
|03-26-2012 02:58 PM|
|fourty4magjr||I don't even have the bolts on mine|
|03-26-2012 02:54 PM|
|robhurlburt||pretty sure there is supposed to be clearance so you don't tighten down on the actual hinge part. my '99 and '06 the threads stop early|
|03-26-2012 02:13 PM|
Question about putting on full doors
Howdy guys, recently I removed the doors off my TJ for the first time ever. I have put them back on without any problems. Iv'e noticed that after I have tighten down the pins with the nut and try to lift the door, it lifts up a little bit. I wanted to know if this was normal?
My door opens and closes with no problem, but I don't remember my door having a little bit of play before I took off the door with the bolt tighten down. Did I need to add a washer or something? The nut is threaded on right and everything. Anybody have this issue?