|01-14-2013 09:33 PM|
|wrestler22115||Was wondering if you have any pictures of your bracket support that is on the tub? And you said you had to drop the tank? does that mean i got to take my bumper off. It was a pain in the butt to get that on.|
|04-24-2012 12:30 AM|
|04-23-2012 12:55 AM|
|H2_recoveryteam||Looks good man keep it up!|
|04-22-2012 06:11 PM|
|kjg26||Any issue with the tailgate itself collapsing...seeing as its hollow?|
|04-22-2012 05:30 PM|
Almost done...only getting one day a week to work on it but oh well. I figured before painting I would update some things.
The 2.5" bolts through the tailgate is too long so I am going to switch to 2". For the part of the hinge that goes through the body I ended up using 4" full thread bolts to reach all the way through. For the bolts holding the cables inside the wrangler, I used 2.5" 1/2" grade 8 bolts with around 10 washers to pack it out. On the inside of the 1/2" bolts I used two pieces of 1/8" steel plate on top of each other for strength. Im going to add a slam latch for the top right of the tailgate so it sits flush. All in all this was an easy and fun mod. Thanks H2.
|04-10-2012 07:43 AM|
|denisbaldwin||That's a great idea! Love it!|
|04-09-2012 10:27 PM|
|04-09-2012 07:12 PM|
|04-09-2012 02:02 PM|
|04-09-2012 05:45 AM|
|cavediverjc||Over the past month I've gathered all the parts required to do the fold-down gate conversion to my YJ. I've got everything to do the job now and was wondering if those of you who've already done it had to drop their gas tank to get to the backside of that panel underneath the gate. It looks like I'm going to have to go that route. Just wondering if any of you had any tricks that I should be aware of to make this mod go smoother. I'm looking at doing the conversion in a couple weeks.|
|04-09-2012 12:35 AM|
Cable might be same length as a Dodge, but I used a 95-2002 GMC 1500/Silverado cable, got it at AutoZone for about $7. Advance Auto had the same exact brand for $15.
Overall I am glad I did the conversion, but since I have no back seat sometimes the cargo slips all the way forwards and I have to climb in to get it. Sounds nitpicky I know but I imagine the more beat up and less flexible I get the more it will happen.
Other than that I can't think of any negatives.
|04-08-2012 08:34 PM|
|04-08-2012 05:22 PM|
|60mg||I was wondering how's setup with one lock works? Does the right side rattle at all? ... well, unless I missed something|
|04-08-2012 04:25 PM|
|H2_recoveryteam||Bump for thread revival. It seems like you guys have some questions. Ill do my best to answer them! And thx for everyones kind words.|
|04-07-2012 07:37 AM|
|00tj2||Looks great. I just ordered the swag kit yesterday... I thought about going your route but...well, I guess I got lazy.... Nice work|
|04-06-2012 10:56 PM|
Great job. I've been looking into this my self since i bent my tail gate i got a junk yard one. I think i am gonna also make a back lit oldschool cj "jeep" plate for the back of the gate to cover the old tire carrier holes.
One thing I might try too is to use the old door hinge locations on the tub to hold my spare tire. I also want to make it pin removeable for trailing. I don't need the spare off road really it can just stay with my tow rig. Plus it makes the back end flat.
I actually bent my gate becuse the tire was on there and the tire hits stuff before my bumper.
|03-28-2012 11:21 AM|
|YJkiddo||Heck yeah man thanks very much, i can't get his mod off my mind! I just thought, maybe a third drop line instead of just two, but that doesn't really help for hinge strength|
|08-28-2011 05:28 PM|
|tella||great idea i like that. I think im going to do that this weekend|
|08-23-2011 03:49 AM|
|08-23-2011 01:43 AM|
|2ManyHobbies||Ok, Thanks for the info. Im in afghanistan right now, but when I get home Im gonna look into this mod(always wanted this done). I will post up pics of the finished project. Thanks again.|
|08-22-2011 02:47 PM|
|H2_recoveryteam||Yes i used some flush mount bolts and on the backside of the tub i cut about 3-4 inch sections of that 1/8 thick 3ft long section of steel i got At home depot. And dilled holes and painted it black. You have to put something there for a backing plate for strength. The sheet metal in the tub is very thin.|
|08-22-2011 05:02 AM|
|2ManyHobbies||Thanks for the reply. Another quick question. How did you mount the hinge to the body? Did you use a piece of metal on the backside?|
|08-21-2011 04:34 PM|
|08-21-2011 04:32 PM|
|08-18-2011 10:04 AM|
|Bostonshooligan||dose it rattle at all? and can you still put your hardtop on?|
|08-18-2011 08:50 AM|
|2ManyHobbies||Great job! That was a great idea re-using the factory hinges, never thought of that. Where did you get the metal plate for the inside of the tailgate? and did the year of the dodge ram matter?|
|08-11-2011 01:55 PM|
|H2_recoveryteam||It holds me an my gf no problem. So prob about 300 LBS. Makes a great spot to eat lunch on the trail now.|
|08-11-2011 12:50 PM|
|andiesel||dumb question: how much weight would you trust sitting on there? 100lbs? more?|
|08-10-2011 09:08 PM|
|08-10-2011 09:05 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|