|03-31-2012 09:28 PM|
My setup consists of:
Clevis pin disconnect.
Two zip-ties, one through the truss in between the body, and fender. One hanging from the first zip tie.
One zip tie around the sway bar, and a carabiner to connect the two together. (the swaybar link folds up alongside the swaybar. It doesn't seem to want to fall.)
|03-31-2012 05:27 PM|
|Jerry Bransford||Yep zip ties or bungee cords. Look on your front coil's upper mount, you'll see a very convenient gap where it is welded to the frame for passing a zip tie or bungee cord through for holding it up.|
|03-31-2012 05:26 PM|
|Skol-Vikes||All good thanks!|
|03-31-2012 03:37 PM|
|wavebacktothetj||Zip ties dont let them hang they could get damaged|
|03-31-2012 03:22 PM|
Help! front sway bar
When you take your quick Disconnect rods off, do your front sway bars stay in place or do they swing down. How do you get them to stay up in place?