|04-02-2012 10:02 PM|
|The Ugly Jeep||Thanks. I'll check that out.|
|04-02-2012 07:23 PM|
|HarryJeepGuy||Look up UCF (Under Cover Fab). They have options on thickness, Steel or Aluminum, body lift or none.|
|04-02-2012 06:37 PM|
|The Ugly Jeep||
Transmission Cross member
Short story long....
I have a 97 TJ 2.5L. Installed a transfer case drop when I lifted it.
Smashed it good....bent the mounting bolts to the point where one of them snapped. Plate looks bent to the point that when i remove the drop kit to add my SYE, it will not bolt up flat to the frame. Do any companies make a replacement that can take more of a beating than the stock design, without me needing to add a body lift?