|04-05-2012 10:44 PM|
|mgh488||awesome. So what is the first thing I do when I pick it up...besides register it. I thought about tackling some rust. Like going through and scraping everyhting I can of or treating it. I guess i would need to do a tune up...is there a sticky or a guide for that? any suggestions?|
|04-05-2012 09:22 PM|
|busemans||yup, that thing looks as good as my south texas jeep looks|
|04-05-2012 08:10 PM|
|mgh488||Thanks this info is what I was looking for.|
|04-05-2012 07:20 PM|
|Nubby55||From what i see in your part of the world that thing looks good, some folks buy a real POS RUST BUCKET, then want to know how to make it Cherry, looks good from here.|
|04-05-2012 05:17 PM|
As far as any rust I do see Ive read I just wire brush it off, then coat it in por-15 or some other durable sealant? Have any of you had to make a weld hear or there?
The instrument cluster is missing the volt meter, Temp and clock do not work...is this a hard fix?
|04-05-2012 05:10 PM|
I inspected those places when I looked at it. There was some flaking paint on the bottom of the grill. A little surface rust along the dash. nothing major or rotting though, excpet the exhaust hanger bracket in the rear looked a brittle. My main concern was the frame based on what you all talk about on here.
Thanks for the comments buildem . I really appreciate it.
|04-05-2012 05:04 PM|
|DILLIGAF||You should be fine with that purchase, seen a lot worse go down the road for a lot more. check the frame above rear shackles, the frame arear for transmission skid plate bolts, floorboards, when you see any spray paint it generally covers up the rusty areas a bit.|
|04-05-2012 04:51 PM|
|Ibuildembig||does look good.....main places rust will be on the body are, under where it says jeep in the kick panels, tops of fenders, in front of the rear fender flares, and tailgate|
|04-05-2012 04:39 PM|
Here is the body.
The Jeep looks solid but this is my first and have nothing to compare it to.
|04-05-2012 04:32 PM|
|Ibuildembig||That looks great considering the area you are in.....how about body pics now?|
|04-05-2012 04:28 PM|
|mgh488||Hopefully they worked now.|
|04-05-2012 04:21 PM|
|Ibuildembig||The pics aren't working man|
|04-05-2012 04:18 PM|
|mgh488||Please any comments...even to tell me its a POS. Anything about it!?|
|04-04-2012 11:43 PM|
So I got some pictures can anyone give me an opinon?
|04-04-2012 02:03 PM|
|mgh488||ttt any other help?|
|04-03-2012 09:08 PM|
|mgh488||Exactly...i dont want a bucket of rust. However Im from Maryland...and used to seeing that tough surface rust that looks like solid mud. The frame itself is matte black in most areas especially around the shackle areas. Im looking for a general opinion on surface race on linkages, axels etc. From what I can tell, the frame is most important.|
|04-03-2012 08:49 PM|
First off, Welcome to the forum.
If it's just scaley surface rust then I wouldn't worry too much. If the metal has started to pit and flake at the edges then keep looking. The spings would have to rust REAL bad to be detrimental to their integrity. They are not painted so naturally they are going to rust a little.
You didn't say where you were from. It doesn't 100% gauruntee you a rust free Jeep but one from the south with have better odds than on from the north. They don't call it the rust belt for nothing ya know.
For under 3K you can't expect much but you don't have to settle either. Buying a rusty POS will end up costing you more in the long run anyhow.
|04-03-2012 07:50 PM|
First Jeep, Looking at 89 YJ - Frame=No Rust
I need an opinion. Im looking at buying my first Jeep and it is an 89 YJ 2.5L 5 speed. The frame at the rear shackle points has no rust. The inside of the body has some small surface areas most notably the radio rack, but I take it with a grain of salt as its from 1989 and paint does peel. When looking at the undercarriage I couldnt help but notice the surface rust. Yes this is not a newer vehicle but the leaf spring/U-bolt area just seemed coated with surface rust. Im no stranger to ORV's but was just wondering if this is typical. I can deal with cosmetics. I read alot on here and everyone talks about the body and frame as the big rust points. what about the under carriage? Could someone give me a buy or do not buy example or explanation. The price asked is under $3k. The vehicle will be more of an intown/knockaround/ hunting/farm trip vehicle.