|04-10-2012 12:38 PM|
|Woodsb16||I thought I had replaced the ignition module but it was actually I think the voltage regulator fo the coil. So I found the actual ignition module that was under the coolant tank. Replaced it and succes, now I just need to figure out how to adjust the carb.|
|04-09-2012 11:34 PM|
|khende||Please check the ground from the engine, if it is not complete all kinds of crap will happen. Buy a battery line that will take you to the fire wall, use a wire brush to clean off the paint and intall the line. If this does not help, God help you. lol.|
|04-09-2012 10:56 PM|
|emrickjeep||i have same problem,, island jeep beast,, still checking stuff,,let me know pls|
|04-08-2012 08:40 PM|
|Woodsb16||Has no one else had this same problem? Could it possibly be in the steering column. I really hope not but a friend suggested that. The engine turns over I'm getting fuel I just need some fire.|
|04-08-2012 12:58 AM|
|cmoconnell||and the battery......|
|04-07-2012 10:34 PM|
It by-passes to computer in some states it may not pass inspection, unless you hide your work well.
It's a long explanation, you can Google jeep YJ nutter by-pass, hope this helps.
|04-07-2012 09:25 PM|
|Woodsb16||I don't have voltage to the coil. What is a nutter bypass?|
|04-06-2012 08:17 PM|
You changed Dizy so should be new pick-up, only thing left is a bad wire or that damn Computer.
I sure love my Nutter By-pass!
|04-06-2012 02:39 PM|
Have you checked that you're actually getting power to all those?
Stick a multimeter/circuit tester at the connection to the distributor. If you have power there, you should get spark.
If not, recheck all the connections, fuse box and the main ignition switch on the lower back of steering column. Could be a broken wire, too....basically, you're going to have to chase the current from it's source and find where it's not getting thru.
I haven't heard of the distributor pick ups going bad often, but that's a remote possibility, too.
|04-06-2012 02:16 PM|
I have a 1988 Jeep Wrangler that will not spark. I have replaced distributor, distributor cap, ignition coil, and the ignition module. I have run out of ideas. Somebody throw me a bone!!!