|11-05-2012 08:37 PM|
|SilverSport||Supposed to be same technique but......you may damage it getting it off.|
|11-05-2012 05:06 PM|
I have the same question...tons of threads and vids on removing the shifter knob but I've found nothing on the transfer case knob.
Same technique or do you have to basically destroy the transfer knob to get it off?
|04-20-2012 01:04 PM|
However, still no luck getting my transfer Case shifter knob off...I have tried lubing it up, grabbing a vise-grip and twisting it side to side, then pounding up with a hammer...no go...may just have get the dremel out and cut the knob off.
|04-20-2012 12:54 PM|
|GonzoBobH||My drake knobs came in the mail. Don't have a jeep yet, but the knobs sure are nice, though they seem kind of small-ish. Can't wait to put them on. 10 weeks since ordering and counting...|
|04-20-2012 12:39 PM|
|SlackerMD||oh, definitely...i should add to do this only if you do not plan on keeping the knob.|
|04-20-2012 12:15 PM|
|04-20-2012 12:12 PM|
|SlackerMD||not tough at all...put some vise grips around the midsection of the oem knob, "gently" torque the knob left and right a few times, then it pulls right up.|
|04-20-2012 12:03 PM|
|jk'n||Good luck, they are tough to get off. Report back how it went.|
|04-20-2012 11:47 AM|
|Kangaroo21||Thanks a bunch! I am gonna try it this weekend!!!!|
|04-19-2012 10:12 PM|
Check out these threads. They may help...seems like some people have a lot more trouble than others:
Shift Knob Removal
Gear shift knob
2012 Shift Knob thread diameter?
|04-19-2012 10:04 PM|
|daggo66||It has nothing to do with 2012. They have never been threaded. A good yank will pull it off.|
|04-19-2012 09:59 PM|
|Ifinallygota21v||YouTube has some how tos|
|04-19-2012 09:54 PM|
2012 Unlimited Sport - Shifter Knobs - 6 speed manuel
After searching for 3 days on the internet I finally saw the shifter/transfer knobs I want... After several phone calls I found out that in 2012 Jeep decided to go away from the thread patterns and went with the spine set up?
Is this true and does anybody know how to remove the OEM knobs?
I really want these new knobs that I found!!!