|05-14-2012 03:15 PM|
Digital calipers, press, setup bearings, torque wrench, odd size sockets, various specialized tools, etc... And absolute precision. If it's something you're going to do often and you don't have all the tools yet, then sure it's a good investment to do it yourself. If it's a one time thing, then it's cheaper and better long term to have someone else do it. Don't forget that the cost of the labor usually is breaking down the axles and all the headaches that usually come along with that, not just simply throwing in a new ring and pinion.
Pirate4x4.Com - The largest off roading and 4x4 website in the world.
|05-14-2012 02:52 PM|
|05-14-2012 02:32 PM|
|4Jeepn||shop near me is 250 for labor... each end.|
|05-14-2012 02:24 PM|
I suggest you read up on the subject on the net and take your time....
Dial indicators are Avail from Chi Com tools, better than none at all.
You can use regular grease for set up of tooth contact or Prussian Blue.
You will need to press on new bearings $$$$$ unless you can remove the old ones with out damage. Keep everything as CLEAN as possible, use proper jack stands, be safe !!
Again, Read up on it and take your time...Don't let a bunch of "friends" hanging around steer ya wrong !! Save the Brew til yer done !!
Good luck!... "BH"
|05-14-2012 12:59 PM|
Where are you from?!? Lol! I priced it in pa and the cheapest is almost 2000 parts and labor.
I think I will give it a go. Everything I've heard and read just requires a micrometer. I have air tools and such.
It's not so much the money( a little!) it's more that I do pretty much all the mods and work now and would just like to know.
... Just a bit nervous because of how many mechanics don't attempt it...
|05-13-2012 07:42 PM|
|darkproximity||Gears are just time consuming and can require special tools, almost everyone here on wf thinks you have to pay ten grand and your first born to have them done, or only God himself can set them up.. If you have time, tools, and patients to do them yourself I say go for it.. Do research and have at it. Seems a lot of shops want to charge an arm and a leg for labor though.. Around here you can get them installed for 125 an axle, and for most that's a pretty reasonable trade.|
|05-13-2012 07:34 PM|
|pfig88||Gears are one thing that it might be best having someone else do: you can't really run by trial-and-error unless you're keen on buying multiple sets of gears|
|05-13-2012 05:58 PM|
Setting Up a Differential Ring
|05-13-2012 05:48 PM|
|V00D0013||Piece of paper that is! Not a "pare"|
|05-13-2012 05:37 PM|
|V00D0013||That's what I'm worried about! He said basically with calipers and a piece of pare you can center it and if it whines- to tight, if it clunks- to loose. Scratching my head over this...|
|05-13-2012 05:33 PM|
|05-13-2012 05:25 PM|
Dare me to change out my ring and pinions myself!
Been talking to a friend who swears it's easy to change out my gears. I have 37" tires and think im going to regear in a 5.13 or 5.38. Any advice? Yay or Nay?