|05-20-2012 02:24 PM|
The cap will become one with the module, and when you go to remove the cap, you destroy the stem and effectively the module... Also, in case you don't know, NEVER use fix a flat or slime or similar in a tire with a TPMS module.....
|05-20-2012 12:00 PM|
|pkmcd99||If you put chrome on it will make your jeep go faster|
|05-20-2012 11:59 AM|
|Spro12JK||Ok in this case I will leave the black caps on but how do chrome caps mess up the TPMS?|
|05-20-2012 11:31 AM|
Keep the rubber caps on and deal with the way they look, unless you want to fork over the $150+ per tpms module to replace them..... Not warrantied if you jack 'em up by putting on metal caps that will seize to the module.....
|05-19-2012 08:49 AM|
|Rock45||You can put a piece of black heat shrink tubing (get it at any auto parts store in the wiring dept) over that valve stem and clean it right up...easy!|
|05-19-2012 08:11 AM|
|CRNA||Use the ncikel plated 9mm shell casing caps they sell at differing vendors. $8/set. The shell is longer than most caps and will cover the brass. Not as shiny as chrome, but still silver.|
|05-19-2012 07:43 AM|
|05-19-2012 01:29 AM|
chrome valve stem jeep | eBay
I just got chrome with pink crystal ones and they fit perfect!
|05-18-2012 11:47 PM|
|Vin||Chrome/steel stems + the alluminum tpms=bad mojo.|
|05-18-2012 11:28 PM|
|05-18-2012 11:07 PM|
Black Sharpie will take care of that brass
Or Plasti-Dip that ####
|05-18-2012 11:03 PM|
Valve stem caps
Yeah I know this is stupid but where can I find the right caps? I want to get the chrome caps but I can't find them anywhere. These aren't the usual type you can get in the parts store. Why do these have to be so different? I put one of my chrome caps on my wheel and this is what I got. Cant put chrome sleevs on. The brass will still show.