|01-02-2013 07:23 PM|
Definitely post up pics...
After installing a amp and sub box today on the inside, now it's time to brighten up the streets with some new DDM Tuning stuff.
|12-30-2012 09:16 PM|
I will post them soon. Sorry I won't have 'before' photos coz I was really excited to try the new ones on. I want to post 'after' photos taken from a very dark place so that you can see how they really light things up at night.
|12-30-2012 07:31 PM|
|12-30-2012 06:41 PM|
I installed mine just now! They're awesome!
Thanks for the posts. I made my purchase decision entirely based on the information from this thread.
|12-30-2012 12:41 PM|
|12-29-2012 08:39 PM|
|12-29-2012 07:09 PM|
Do the lights still work well? Any issues with the DDM kit?
I plan to do this soon, but I have Delta head lamps.
Hopefully these will work.
|12-29-2012 08:32 AM|
|12-28-2012 09:13 PM|
Any updates from NecroMancer?
Curious how VA inspection went.
Thanks. Great thread.
|12-05-2012 08:35 AM|
|12-05-2012 08:29 AM|
I did not have the warning sticker that you can see on Mr. Necromancer's lights. I think I also see one on his box. My housings are the exact same with the same writings but they just don't have the warning stickers.
|12-04-2012 05:36 AM|
|wmdavis007||If they are Hella e-codes then they are not DOT approved and they are for offroad use only here in the States. But A LOT of people run them here...as for a "sticker" saying for offroad use only, if they do not have DOT in the glass they are not legal. But I run them and have never had a problem passing inspection|
|12-04-2012 04:58 AM|
|Neil F.||What sticker?|
|12-03-2012 10:54 PM|
Just got my hella Ecodes lights from Quadratec today in the mail. They did not come with bulbs but I will use DDM's bulbs. I noticed that they did not come with the infamous "sticker" that would deem them somewhat illegal so I am happy about that.
I will post pictures after completing the installation when the DDM kit arrives.
Thank you all, I truly appreciate the good information.
Hopefully Bambi's and her fawns will be safer around me at night.
|11-21-2012 11:46 AM|
Well I'm used to doing resarch. (Engineer here) Sometimes better technical answers can be found on websites more quickly than waiting for answer in a thread (and sorry to say, sometimes incorrect answers or shooting from the hip)
ece headlight - Google Search first hit on Wikipedia has the information
Regulations and requirementsModern headlamps are electrically operated, positioned in pairs, one or two on each side of the front of a vehicle. A headlamp system is required to produce a low and a high beam, which may be achieved either by an individual lamp for each function or by a single multifunction lamp. High beams (called "main beams" or "full beams" or "driving beams" in some countries) cast most of their light straight ahead, maximizing seeing distance, but producing too much glare for safe use when other vehicles are present on the road. Because there is no special control of upward light, high beams also cause backdazzle from fog, rain and snow due to the retroreflection of the water droplets. Low beams (called "dipped beams" or "passing beams" in some countries) have stricter control of upward light, and direct most of their light downward and either rightward (in right-traffic countries) or leftward (in left-traffic countries), to provide safe forward visibility without excessive glare or backdazzle.
ECE dipped/low beam
Asymmetrical low beam illumination of road surface – right-traffic beam shown
 Low beamLow beam (dipped beam, passing beam, meeting beam) headlamps provide a distribution of light designed to provide adequate forward and lateral illumination with limits on light directed towards the eyes of other road users, to control glare. This beam is intended for use whenever other vehicles are present ahead. The international ECE Regulations for filament headlamps and for high-intensity discharge headlamps specify a beam with a sharp, asymmetric cutoff preventing significant amounts of light from being cast into the eyes of drivers of preceding or oncoming cars. Control of glare is less strict in the North American SAE beam standard contained in FMVSS / CMVSS 108.
 High beam
ECE high/main beam
Symmetrical high beam illumination of road surface
High beam (main beam, driving beam, full beam) headlamps provide a bright, centre-weighted distribution of light with no particular control of light directed towards other road users' eyes. As such, they are only suitable for use when alone on the road, as the glare they produce will dazzle other drivers. International ECE Regulations permit higher-intensity high-beam headlamps than are allowed under North American regulations.
 Compatibility with traffic directionalityMost low-beam headlamps are specifically designed for use on only one side of the road. Headlamps for use in left-traffic countries have low-beam headlamps that "dip to the left"; the light is distributed with a downward/leftward bias to show the driver the road and signs ahead without blinding oncoming traffic. Headlamps for right-traffic countries have low beams that "dip to the right", with most of their light directed downward/rightward. Within Europe, when driving a vehicle with right-traffic headlamps in a left-traffic country or vice versa for a limited time (as for example on vacation or in transit), it is a legal requirement to adjust the headlamps temporarily so that their wrong-side beam distribution does not dazzle oncoming drivers. This may be achieved by methods including adhering opaque decals or prismatic lenses to a designated part of the lens. Some projector-type headlamps can be made to produce a proper left- or right-traffic beam by shifting a lever or other movable element in or on the lamp assembly. Many tungsten (pre-halogen) European-code headlamps made in France by Cibié, Marchal, and Ducellier could be adjusted to produce either a left- or a right-traffic low beam by means of a two-position bulb holder.
Headlamp sold in Sweden not long before Dagen H changeover from left to right hand traffic. Opaque decal blocks the lens portion for low beam upkick to the right, and bears warning "Not to be removed before 3 September 1967".Because wrong-side-of-road headlamps blind oncoming drivers and do not adequately light the driver's way, and blackout strips and adhesive prismatic lenses reduce the safety performance of the headlamps, some countries require all vehicles registered or used on a permanent or semipermanent basis within the country to be equipped with headlamps designed for the correct traffic-handedness.[according to whom?] North American vehicle owners sometimes privately import and install Japanese-market (JDM) headlamps on their car
|11-21-2012 10:54 AM|
|11-16-2012 08:51 AM|
|11-16-2012 03:41 AM|
|11-16-2012 03:34 AM|
I currently have the hella vision plus with the HB2 bulbs. Would it be possible to upgrade to the setup you are running and use my existing housings? I know I would need to do the wiring upgrade but wasn't sure what the difference was between the two housings besides one not being DOT approved.
|11-13-2012 03:34 AM|
|11-12-2012 09:10 PM|
|mnatl||thanks for writeup!|
|11-10-2012 06:53 AM|
|Neil F.||Then buy elswhere|
|11-09-2012 08:12 PM|
But can someone explain to me how quadratec thinks they can get away with almost $15 for shipping and on PIAA 520 ATP they are charging me $38???!! The total with the combined is $48 just to ship to ohio.
|11-06-2012 06:47 AM|
|11-06-2012 06:44 AM|
jeep was parked about 25feet away from the wall.
|11-05-2012 02:41 PM|
|11-05-2012 01:37 PM|
here is the pic of the hella reflector.. i removed both of them as my kensun bulbs already have reflectors and i needed to clean the haze on the lens. ill upload a wall pattern pic when i adjust them, prob tonight.
|11-04-2012 08:48 AM|
|povchrisw||I will try and post pics of both hella light deflector and light pattern on a wall as soon as I get my new bulbs in|
|11-02-2012 08:31 PM|
For what it's worth, my HID auxilliary lights had a failure to reliably start on one bulb. I made it work for a while by turning it off/on a time or two until the bulb started. It got steadily worse and I cured it with a new HID BULB.
I gotta say, I still have misgivings about HID's in Halogen reflectors versus the projector housings. Could you please publish the light pattern on a wall when you do the following aim procedure?
|11-02-2012 04:30 PM|
|This thread has more than 30 replies. Click here to review the whole thread.|