|02-06-2013 12:59 PM|
For the OP, you need to slide the bottom corner back to smooth out the wrinkle, it should line up and strap on the roll bar and not go on the outside of the door surround. You want to be able to use your doors properly when they are back on.
Here's my Bestop safari/CRES setup : (Safari top vs. bikini will eliminate any cutting in the CRES)
|02-06-2013 12:25 PM|
|02-06-2013 12:19 PM|
|SpartanX13X||can this be done with a soundbar with a domelight? im still new to jeeps, thanks|
|12-04-2012 10:42 PM|
|dylan1991||Lot's of good info in this thread. It's short but it showed me everything I needed to know about the Safari and CRES fitting at the same time. This should be stickied for the people looking at these tops.|
|11-03-2012 10:31 AM|
I love my C.res with my Bestop Safari top. Great summer combo. Can't wait untill April!
|11-02-2012 09:43 PM|
|11-02-2012 08:38 PM|
|Carlsbad0331||I had the guy at 4wheel performance parts tell me today that this couldnt be done. Glad to see it can. I will go back tomorrow and pick up the bikini top that I wanted to buy today.|
|05-25-2012 12:25 PM|
|05-25-2012 10:57 AM|
|Dragonii||CRES was right under $100, bikini was $50.|
|05-25-2012 08:26 AM|
|SIXTI||Looks great. What's the cost?|
|05-25-2012 06:10 AM|
|05-25-2012 05:40 AM|
|05-25-2012 12:01 AM|
|Thruxo||Has anyone been able to figure out how to put on the cres with a 4 door bikini top for the jk? I want to run both but need to think of a creative way to do it because currently the cres uses the channel slots that the bikini top uses. I would have to rig it somehow like you guys did.|
|03-17-2012 06:51 AM|
I run my Smittybilt CRES top with my safari bikini top all summer.
|03-17-2012 03:10 AM|
Smittybilt CRES with bikini (brief) top
So, I tried searching for this answer before I bought mine and couldn't find anything definitive, so I thought I would post my findings.
I needed to add some sort of netting to the tub for the dog, but I wanted to be able to run a bikini top with it. I chose the Smittybilt CRES... with a $98 price tag I don't think I have to explain why. With it I ordered a Smittybilt Standard (bikini/brief) top with the hopes that they would work together.
First off, let me say, the Smitty brief top WILL work with a Rampage bolt on windshield header. (That was another concern since my full top of choice is the Rampage frameless system)
When I tried putting the CRES on with the brief I found that the straps kind of got in each others way. So I had to get creative.
First, start with installing the CRES. Then put the bikini on so that the rear of the bikini overlaps the CRES's front edge.
The front of the bikini goes in normally, it's when you get to the overlapping part that it gets fun.
The bikini has 4 straps that wrap around the roll bar and one that goes around it and to the footman loop. Run the center (footman) strap through the center hole in the CRES. For the two outer straps take a pocket knife and cut a small slip in the CRES right between the rollbar and speaker pod just wide enough for the strap to go through and proceed to strap it down like normal. The other two straps (the ones between the two outer and the footman strap) I chose not to use. I don't see why they would be needed and they are a pain even if you don't use the CRES.
Here's some pics of the finished install. As you can see, the seam/overlap comes out rather smooth once you poke those two holes in the CRES for the straps. If you have any input or recommendations or whatever... feel free to post 'em.