|07-17-2014 02:23 PM|
I still have a few things to do before any hardcore wheel'n but i got full steering back with these tires. Im very happy with how this build came together.
|07-13-2014 02:25 AM|
|97flexy||My wonderful wife surprised me with four brand new wheels for my new 9.00-16 tires. So along with rebuilding my front and rear track bars, and finally installing a new steering box instead of the junk yard one I had, I will also be mounting and balancing my new tires and rims. Then the plan is to get it aligned at Ford and clearance anything that needs it.|
|01-11-2014 07:16 PM|
|97flexy||next upgrades are a new 3rd member with a spool and the correct gears, new tires (I found some STA super lugs) in 36x8.7/16 and a new winch. I'm looking to get one thats a bit stronger then my 8K winch possibly faster too.|
|11-26-2013 02:31 PM|
|11-25-2013 10:12 AM|
|jeepster1407||Cool build man! I'd like to see some action shots.|
|11-22-2013 10:20 AM|
|97flexy||Took the jeep out about a month ago to the cliffs for a test run and nothing broke the Jeep did great! I ran my softer front springs, and a spring unseated but nothing major. Reinstalled the taller springs. I'l throw some pics up tonight. I finally bought my self a heater, I will be installing that tomorrow for T4T on sunday. Supposed to be a high of 25degrees on sunday here in the fine city of chicago.|
|05-13-2013 02:00 PM|
|05-13-2013 01:59 PM|
front mini spool works, front radius arms hit the frame now so i need to clearance the frame, rear LSD works going to sleeve the rear arms in DOM this week. then time to save for a trailer rental a fuel costs to get to the park!!! cant wait to try it out!
|05-11-2013 12:21 PM|
|05-11-2013 10:35 AM|
|97flexy||GOT 4x4 working! now need to clearance the frame and skid plat the bottom then off to the park. new front radius arms are built!|
|04-21-2013 03:21 AM|
|04-16-2013 09:37 AM|
|GoldenSahara00||I went with 3/16 for my skid, it's not too heavy, and I will still be bracing it. I was thinking of using half pieces of 2x2 square cut down the middle for the bracing points. What are you going to use?|
|04-16-2013 02:46 AM|
|04-10-2013 12:38 AM|
|97flexy||Its taking awhile to get my new arms cut and welded. I decided to go with .500 wall DOM tube for my new front radius arms. after that I need to get a new steering box and then pass emissions, I've decided to run 1/8" plate as my skid plates and if I need to strengthen them I'l do that as needed. but 1/8" should be fine and cheap. When I buy the skid plate I'l post pics of the reinforcement I'm talking about, the belly skid will have reinforcement on however I doubt the engine skid will have any.|
|03-02-2013 05:27 PM|
|02-24-2013 01:20 PM|
|Border Dave||Have you built a new skidplate yet?|
|02-09-2013 02:06 PM|
|02-09-2013 09:24 AM|
|Raiderfan001||My stock JK wheels are 7.5" wide. They're the 17" Sport S ones on a 2010.|
|02-01-2013 04:19 PM|
|01-31-2013 03:34 PM|
And maybe I missed it but what happened to the stinger?
|01-31-2013 01:55 PM|
|schnutzy||I believe the stock steel wheels from a jk will fit the bill for size, bolt pattern, etc|
|01-31-2013 10:58 AM|
New tire 9.00-16(36x9) Goodyear High Milage. Need to get a truck to go pick up the other tires, so might be a week of so. the gotta find some 16x5 to 7 inch wide wheels with 5x5.5 bolt pattern.
Also my new 1/2" synthetic, 20,000# break strength winch line and fairlead complements of my wonderful wife.
|01-31-2013 10:46 AM|
|97flexy||found some 36s bought one and mounted it on the jeep as a test fit and it looks perfect, going to get the rest and 4 more wheels. Also Finally got my custom exhaust welded and installing it today, hooking up the 4x4 cable linkage tonight, front drive shaft is in place too. 4x4 is just around the corner.|
|01-16-2013 12:29 AM|
|97flexy||too wide for my heep. the widest body part is my tub and right now about 6.25" of tires sticks out of my body, the cops around here don't like it, the 36x9s might stick out of the tub but should only be the bulge. plus I started my build as a skinny tire rig and went with 35x12.5s cause I got a good deal on them. but they just don't work with my truck. I might end up picking up the new tires in the next week or so.|
|01-15-2013 03:38 PM|
|Zombiekiller||whats wrong with the 35x2.5s?|
|01-13-2013 11:52 PM|
|01-11-2013 09:06 AM|
|01-11-2013 09:01 AM|
getting sick of my 35x12.5s
thinking of selling my tires, they make me not want to drive it.
|11-08-2012 06:15 PM|
|97flexy||Finally the rear drive shaft should be done and ready for pick up tomorrow!! looks like this weekend the tires will get balanced|
|11-02-2012 09:04 AM|
its getting there, the hub lockouts just showed up. got em on, all the brakes are hooked up. straps are on shocks are mounted, waiting on my custom drive shaft.
not on my bump stops yet but maxed my jack out.
|This thread has more than 30 replies. Click here to review the whole thread.|